New firmware release notes.

You're installing it ?  I haven't switched mine on today.

Hopefully this update will not affect the MA2 or Mini2 with new bugs.

MySky Posted at 6-30 07:44
Hopefully this update will not affect the MA2 or Mini2 with new bugs.

Very, very interesting comments, really!   

frankymusik Posted at 6-30 07:57
Very, very interesting comments, really!

Likewise.

Lots of good updates for Portrait Mode, some strange omissions especially no support for Air2s.

Blériot53 Posted at 6-30 07:40
You're installing it ?  I haven't switched mine on today.

All installed I will test in the morning.  

hallmark007 Posted at 6-30 08:10
Lots of good updates for Portrait Mode, some strange omissions especially no support for Air2s.

I wish they added support on the controller for the mini2 as well as the Mavic 3 since they are still selling it.

DAFlys Posted at 6-30 08:22
All installed I will test in the morning.

I'll sit on the fence and await your findings Glass protector installed on RC, and hard case ordered from Heliguy.

Here is the full text:-

Mini 3 Pro V01.00.0200 1060.14MB
• Added support for FocusTrack, QuickShots (Dronie, Rocket, Circle, Helix, and Boomerang),
and Panorama in portrait mode (requires DJI Fly V1.6.8 or later).
• Optimized the anti-interference ability and the transmission distance of the image transmission system.
• Added a two-second option to interval time setting when using Hyperlapse after takeoff (requires DJI Fly v1.6.8 or later).
• Increased the stability of videos when using Hyperlapse.
• Increased the dynamic range for Hyperlapse.
• Added support for continuous auto focus (AF-C) during video recording.
• Increased the camera speed when taking photos.
• Optimized image quality of recordings at night in D-Cinelike.
• Fixed issue: the videos recorded in some scenarios in D-Cinelike flickered.
• Optimized the vignetting effect in DNG photos.
• Optimized the correctness of the battery level indicators on the DJI RC-N1 remote controller.
• Added USB mode. When the aircraft is connected to a computer and USB mode is enabled, the aircraft disables image transmission to extend the time for copying footage (requires DJI Fly v1.6.8 or later).
• Fixed issue: the videos recorded in some scenarios in D-Cinelike flickered.
• Optimized the vignetting effect in DNG photos.
• Optimized the correctness of the battery level indicators on the DJI RC-N1 remote controller.
• Added USB mode. When the aircraft is connected to a computer and USB mode is enabled, the aircraft disables image transmission to extend the time for copying footage (requires DJI Fly v1.6.8 or later).

DJI RC:
• Added support to use with DJl Mavic 3.
• Added support to download photos and 1080p videos to an external SD card. (Panorama photos are not included).
• Fixed issue: inaccurate compass appeared in some scenarios.
• Fixed some minor bugs.

That makes it even better.

Optimized the anti-interference ability and the transmission distance of the image transmission system.

Oh baby, please work please work........

All Batteries require updating..

FlyBoo Posted at 6-30 09:03
Optimized the anti-interference ability and the transmission distance of the image transmission system.

Oh baby, please work please work........

Hehehehehehe..................

hallmark007 Posted at 6-30 09:09
All Batteries require updating..

Figures, main update done tested the transfer to rc works for pics & 1080 vids only. Not flown yet need to uodate batts.

hallmark007 Posted at 6-30 08:10
Lots of good updates for Portrait Mode, some strange omissions especially no support for Air2s.

That's because they want more people to spend more money - if they open it all up for everyone it will bastardise M3Pro sales...

patrick51 Posted at 6-30 09:38
Hehehehehehe..................

Oh please let it stop the complainers.

Satureyes Posted at 6-30 10:00
That's because they want more people to spend more money - if they open it all up for everyone it will bastardise M3Pro sales...

Not sure thats the reason, if it was we would never have seen the release of any Air drone but all 3 of them put a halt to other drone sales like M2/PZ, Mavic 1 etc. I think its more likely the future tech is taken more of their time.

Satureyes Posted at 6-30 10:01
Oh please let it stop the complainers.

O please stop all the people that make 1000000000 Threads about how great the distance is PUKE!

Hello there DAFlys. Good day and thank you for sharing these information with us about the new firmware update for the DJI Mini 3 Pro. Again, thank you for your support and keep flying.

Blériot53 Posted at 6-30 08:24
I'll sit on the fence and await your findings Glass protector installed on RC, and hard case ordered from Heliguy.

Nice,  don't get any splinters again.

DAFlys Posted at 6-30 22:03
Nice,  don't get any splinters again.

Heavy-duty jeans. I should be OK

Mine is showing V01.00.0201.

Guess the 0200 version had a major issue to be superseded so quickly.

fans5d3e3440 Posted at 6-30 22:30
Mine is showing V01.00.0201.

Guess the 0200 version had a major issue to be superseded so quickly.

Oh jeez,  so they have updated it already,  thanks I will see if mine wants to update again.

fans5d3e3440 Posted at 6-30 22:30
Mine is showing V01.00.0201.

Guess the 0200 version had a major issue to be superseded so quickly.

thanks,   there's another update for me today too.  

That sounds good!
Mi3 is starting to get more interesting even!

Some hasty update it seems, they didn’t test it very thoroughly it seems. Now not sure if I want to test it out hopefully it’s only the UI they didn’t test that well, though it’s the easiest one

great to see that DJI is hearing the wishes and complaints and improving the Mini3 - thank you Dji

DJI Stephen Posted at 6-30 19:16
Hello there DAFlys. Good day and thank you for sharing these information with us about the new firmware update for the DJI Mini 3 Pro. Again, thank you for your support and keep flying.

Sounds a bit strange! To my mind it should be DAFlys thanking DJI person for the detailed update explanation

DJI Stephen Posted at 6-30 19:16
Hello there DAFlys. Good day and thank you for sharing these information with us about the new firmware update for the DJI Mini 3 Pro. Again, thank you for your support and keep flying.

Sounds a bit strange! To my mind it should be DAFlys thanking DJI person for the detailed update explanation

sbonev Posted at 6-30 23:56
Some hasty update it seems, they didn’t test it very thoroughly it seems. Now not sure if I want to test it out  hopefully it’s only the UI they didn’t test that well, though it’s the easiest one

[view_image]

I dont see that in the DJI RC...

DAFlys Posted at 6-30 22:41
Oh jeez,  so they have updated it already,  thanks I will see if mine wants to update again.

Is that what scared Henrik?

Blériot53 Posted at 7-1 21:45
Is that what scared Henrik?

https://www.youtube.com/watch?v=fJ7KBtNe0Hs

That was the old release .200 not .201.

DAFlys Posted at 7-1 22:02
That was the old release .200 not .201.

Thank goodness for that.  So I can update now?

Blériot53 Posted at 7-1 22:09
Thank goodness for that.  So I can update now?

I flew 6 batteries yesterday (and one this morning) with .201 and was using the tracking to play with boats and I didn’t have any issues.   But I’m not flying about with a full sd card and screen recording on.  

Also if this happened to me I’d lower it, switch to sports mode and just catch it and flip to kill the motors.

DAFlys Posted at 7-1 22:47
I flew 6 batteries yesterday (and one this morning) with .201 and was using the tracking to play with boats and I didn’t have any issues.   But I’m not flying about with a full sd card and screen recording on.  

Also if this happened to me I’d lower it, switch to sports mode and just catch it and flip to kill the motors.

You're the lucky one with the weather then.  Alternating rain and high winds here, yesterday and again this morning.  I guess I'll bite the bullet and do the updates whilst I'm grounded.

Blériot53 Posted at 7-1 22:50
You're the lucky one with the weather then.  Alternating rain and high winds here, yesterday and again this morning.  I guess I'll bite the bullet and do the updates whilst I'm grounded.

Bt of a mixed bag,   yesterday we were clear of rain for 7 days,    went out in the morning and got wet,  and then washed the car only for more rain in the afternoon.     And then its been windy with gusts around 30mph,   but mini3 seems to cope ok with that.

DAFlys Posted at 7-2 00:28
Bt of a mixed bag,   yesterday we were clear of rain for 7 days,    went out in the morning and got wet,  and then washed the car only for more rain in the afternoon.     And then its been windy with gusts around 30mph,   but mini3 seems to cope ok with that.

One of my flights with the Mini3 was on a breezy day - no signs of trouble then.

Blériot53 Posted at 7-2 00:43
One of my flights with the Mini3 was on a breezy day - no signs of trouble then.

Yes,  as long as you make sure you've got extra battery left to get back its all good,  and at least 5mph better than mini2 was for me.

DAFlys Posted at 7-2 02:13
Yes,  as long as you make sure you've got extra battery left to get back its all good,  and at least 5mph better than mini2 was for me.

I may get chance for a test flight this afternoon.
We've had the drain specialist here this morning reparing a drain broken and blocked by a tree root.
Top job with minimum disruption. Modern plastic lining sleeved inside and heat cured. 3-hour job.