Hello,

I have just purchased the Mini 3 Pro with the RC. I have activated the drone with my account in DJI and done one firmware update. The RC, however, has on several occasions lost network connect at home. I have tried other devices and the internet seems fine. Being a novice with this RC I cannot find a menu to see if its retained the IP of the router or not. I press the Check Network button and also the Retry Box to no effect. I can connect though using a mobile phone.

I wonder if you can advise me what could be up (the RC is fully charged) and how do I find nework settings to try to reinstall the network connection.

Many Thanks

Whenever you launch a flight of the Mini3Pro using the dedicated RC, Wifi and Bluetooth connection are turned off automatically to avoid interference.  After the flight, you have to switch these back on manually.  Not ideal - but that's how it is for the moment.  To do this, swipe down on the controller screen to reveal the dropdown menu, where you can re-activate wifi and/or bluetooth.   When taking off, you should see a brief message stating that wifi and bluetooth are de-activated.

Blériot53 Posted at 8-19 06:51
Whenever you launch a flight of the Mini3Pro using the dedicated RC, Wifi and Bluetooth connection are turned off automatically to avoid interference.  After the flight, you have to switch these back on manually.  Not ideal - but that's how it is for the moment.  To do this, swipe down on the controller screen to reveal the dropdown menu, where you can re-activate wifi and/or bluetooth.   When taking off, you should see a brief message stating that wifi and bluetooth are de-activated.

Hi,
Thank you very much for your help

FreshFlyer Posted at 8-19 11:06
Hi,
Thank you very much for your help

You're welcome

Hello there FreshFlyer. Thank you for reaching out and for giving out these information. Kindly please refer to the posts given above by Blériot53 and Dirty Bird for reference with regards to this matter. Thank you.

connection issues usually has to do with the remote not updated, especially if you are just starting to bind the remote to your drone.
first you will need to update the remote, so install all firmware and update remote, once complete, turn off remote and turn it back on,most issues will be resolved after these steps.
hope this helps.



https://microbirds.com/rc-gliders/

Glideher Posted at 11-5 11:23
connection issues usually has to do with the remote not updated, especially if you are just starting to bind the remote to your drone.
first you will need to update the remote, so install all firmware and update remote, once complete, turn off remote and turn it back on,most issues will be resolved after these steps.
hope this helps.

wrong. It Is a hardware issue.




Read comments.

@FreshFlyer what is production date of your unit? You can find it on sticker of box (Y/M).

SUCKS

Blériot53 Posted at 2022-8-19 06:51
Whenever you launch a flight of the Mini3Pro using the dedicated RC, Wifi and Bluetooth connection are turned off automatically to avoid interference.  After the flight, you have to switch these back on manually.  Not ideal - but that's how it is for the moment.  To do this, swipe down on the controller screen to reveal the dropdown menu, where you can re-activate wifi and/or bluetooth.   When taking off, you should see a brief message stating that wifi and bluetooth are de-activated.

I just stumbled across this too and am grateful for the solution - this doesn't seem to be documented anywhere that I've found.

marinemavic Posted at 3-9 07:43
I just stumbled across this too and am grateful for the solution - this doesn't seem to be documented anywhere that I've found.

I think it's in the manual somewhere, if you trawl through it

Dirty Bird Posted at 2022-8-19 15:16
Should also be noted you CAN use WiFi & Bluetooth during flight as well.  Just swipe down after entering the "Go Fly" screen & click the WiFi and/or Bluetooth button.

That's handy to know, too.  I can't think of any occasion when I might want to take advantage of it, personally, but I guess for livestreaming it must be essential?

Mini pro 3 will not download wifi. Rest password and connection denied . Frustrated .

Blériot53 Posted at 2022-8-19 06:51
Whenever you launch a flight of the Mini3Pro using the dedicated RC, Wifi and Bluetooth connection are turned off automatically to avoid interference.  After the flight, you have to switch these back on manually.  Not ideal - but that's how it is for the moment.  To do this, swipe down on the controller screen to reveal the dropdown menu, where you can re-activate wifi and/or bluetooth.   When taking off, you should see a brief message stating that wifi and bluetooth are de-activated.

Many thanks this worked 100% for me.
Bigyun2000 UK

Bigyun2000UK Posted at 8-5 15:19
Many thanks this worked 100% for me.
Bigyun2000 UK

Great! Glad to help

Staffydog33 Posted at 2022-12-31 00:22
https://www.youtube.com/watch?v=E8KXi73eGCc

SUCKS

Hi
I’m having the same issue with DJI mini 3 pro after I bought a new RC controller and started using it 5 weekss ago. It’s loosing connection with network error in less than 100 m.
I was using Rc-N1 with my iPhone and did not see this happen until distance Is farther than 1000 m or so. I have updated the firmwares to the latest.

Have you found a solution or workaround for this since you last posted?

Staffydog33 Posted at 2022-12-31 00:22
https://www.youtube.com/watch?v=E8KXi73eGCc

SUCKS

Hi
I’m having the same issue with DJI mini 3 pro after I bought a new RC controller and started using it 5 weekss ago. It’s loosing connection with network error in less than 100 m.
I was using Rc-N1 with my iPhone and did not see this happen until distance Is farther than 1000 m or so. I have updated the firmwares to the latest.

Have you found a solution or workaround for this since you last posted?