Hello everyone,

I'm trying to insert to Skypixel new Spehere photos (with new firmware and full 360° spheres) and it seems that it doesn't work. Does somebody else experienced such problem, or it's something wrong on my side? There is message that image is still processing - it's a few hours now....

For the SkyPixel site, I'd recommend allowing all cookies, not just the ones you've allowed for the site itself.
It usually takes me 12 minutes to the site to finally publish the photo, after it's been uploaded.

Simply copy the webaddress from the top of that page into a new page, and it will refresh with the 360pano

same for me since a few days. @Bleriot53: no change, when i open a new session

Now i lock for my browser (firefox) to open all cookies for skypixel. My browser is instructed to delete all cookies

TwoLegs Posted at 10-5 09:26
same for me since a few days. @Bleriot53: no change, when i open a new session

Now i lock for my browser (firefox) to open all cookies for skypixel. My browser is instructed to delete all cookies

Try copying the link address from the top of the page, then post it as a link here in a Forum section.
Let's say, for example
Home/Works/Nature  click on Add Link and paste the skypixel link into the top line, then submit
The 360pano should then open automatically for viewers.
Have a go and then we'll see if it works

Blériot53 Posted at 10-5 10:22
Try copying the link address from the top of the page, then post it as a link here in a Forum section.
Let's say, for example
Home/Works/Nature  click on Add Link and paste the skypixel link into the top line, then submit

Out of curiosity which web browser are you using for this process Mr. B?

DowntownRDB Posted at 10-5 12:47
Out of curiosity which web browser are you using for this process Mr. B?

Google Chrome

Same outcome for me.  I tried to upload from Android phone, using skypixel app and days later nothing.  I am now trying from Windows 11 PC using Skypixel app and same result.  Previous ones loaded no problem.  Only change I am aware of is recent firmware upgrade for RC Pro controller and mini 3 pro.  

I use firefox and what i have found is that it takes ages for the "processing/publishing" and never seems to finish and actually say "completed", ie. 10-15 minutes seems to be my average time when it is done.

I do similar to Bleriot.  Every now and again i open a new tab in Firefox and open "my page "in skypixel again.  Eventually the new uplaod shows there and you can open it.  The i close the upload tab and all is done.

It's a real pain when you have a few 360 panos to send there in the same session, one at a time and 15 mins or so for each with multiple refreshes/new windows whilst hoping it has worked.

There are obviously bugs in their upload/publishing scripts.

At least reading the OP, i know it's not just me or my PC/internet/browser which i initially thought it might be.

I think i've tried Edge and Chrome and am sure they were no better/faster.

Thanks all for advices, tried everything, but no result. Picture is still processing :-/  Guess it will be problem with new Sphere format.. ? (number of pictures, size or something)...  Previous Sphere were uploaded without any problem.

Blériot53 Posted at 10-5 12:58
Google Chrome

I use Chrome also.  Just checking as some of the browsers are not as user friendly but then again some do protect you more from data analytics.

DowntownRDB Posted at 10-6 08:55
I use Chrome also.  Just checking as some of the browsers are not as user friendly but then again some do protect you more from data analytics.

I should really have migrated to Microsoft Edge by now I suppose, but  

Blériot53 Posted at 10-6 09:34
I should really have migrated to Microsoft Edge by now I suppose, but

This must have been sarcasm.

Darkpaw Posted at 10-6 10:51
This must have been sarcasm.

What was it again that Oscar Wilde said about sarcasm ?  

davidy61 Posted at 10-6 00:02
I use firefox and what i have found is that it takes ages for the "processing/publishing" and never seems to finish and actually say "completed", ie. 10-15 minutes seems to be my average time when it is done.

I do similar to Bleriot.  Every now and again i open a new tab in Firefox and open "my page "in skypixel again.  Eventually the new uplaod shows there and you can open it.  The i close the upload tab and all is done.

I'm sure you're right that the problem lies with SkyPixel, and not any one particular browser.

enricorc_cz Posted at 10-6 01:27
Thanks all for advices, tried everything, but no result. Picture is still processing :-/  Guess it will be problem with new Sphere format.. ? (number of pictures, size or something)...  Previous Sphere were uploaded without any problem.

Make sure your maximum filesize does not exceed 15000x7500

jcjohnson72 Posted at 10-5 17:46
Same outcome for me.  I tried to upload from Android phone, using skypixel app and days later nothing.  I am now trying from Windows 11 PC using Skypixel app and same result.  Previous ones loaded no problem.  Only change I am aware of is recent firmware upgrade for RC Pro controller and mini 3 pro.

I've successfully uploaded 360panos from both Mini3Pro and manually-stitched 360panos shot using Litchi and the Mini One or Mavic2 Zoom.  They've all successfully uploaded to Skypixel via either Windows 10 or  11 (two different laptops) but the processing time after upload completes varies from a few minutes to about 15 minutes.  Refreshing the page is the only way to reach the uploaded file. I think it's a problem with Skypixel.

TwoLegs Posted at 10-5 09:26
same for me since a few days. @Bleriot53: no change, when i open a new session

Now i lock for my browser (firefox) to open all cookies for skypixel. My browser is instructed to delete all cookies

Have you had any better luck yet?

Mine says 8192 x 4096.  

I may do a factory rest on my drone and RC just to see if that makes a difference..  

Blériot53 Posted at 10-6 09:34
I should really have migrated to Microsoft Edge by now I suppose, but

No, no, not to ME.  

DowntownRDB Posted at 10-7 03:00
No, no, not to ME.

Blériot53 Posted at 10-7 06:48

  

DowntownRDB Posted at 10-8 05:08

Blériot53 Posted at 10-8 05:39

Did you get Dawn Patrol in today?

DowntownRDB Posted at 10-8 05:52
Did you get Dawn Patrol in today?

I did. Spent the time cloud chasing. Actually drifting mist above the clefts in the hills
Got a view of the Heiligenschein reflecting off the mist into the camera lens, with the sun directly behind the drone.

jcjohnson72 Posted at 10-6 14:33
[view_image]

Mine says 8192 x 4096.  

OK good luck with that. Let us know how you get on

Blériot53 Posted at 10-8 05:59
I did. Spent the time cloud chasing. Actually drifting mist above the clefts in the hills
Got a view of the Heiligenschein reflecting off the mist into the camera lens, with the sun directly behind the drone.
[view_image]

Yeah, that is quite the phenomenon.  

My 360 Panos that originally wouldn't stop processing finally did, without any intervention from me.  Check yours or try them again, and hopefully you get the same results.  Have fun!

jcjohnson72 Posted at 10-9 07:37
My 360 Panos that originally wouldn't stop processing finally did, without any intervention from me.  Check yours or try them again, and hopefully you get the same results.  Have fun!

Yes! They are done Thanks for notice

enricorc_cz Posted at 10-12 03:04
Yes! They are done  Thanks for notice

Seems completely broken to me.

I upload a pano sphere, it appears to "upload" OK. I set the hardware value (Mini 3 Pro), set to "private", click "Publish."  It just swirls endlessly ("360° panorama is processing"), for hours (literally).  If I try to reload the page or share the URL, it coughs up an error saying the content is not available or gives an error: FATAL ERROR: /api/v2/photo-360s/[uploaded file name],xml - loading failed! (404).

Is it always this unreliable?  Does it ever work?  Has DJI just abandoned this?