Hi,

I have been flying Dji Mini 3 mavic pro since 6-7 months.
Recently, it is encoutering erratic hovering with no control through RC remote & almost crashed flying.

I have updated software through Dji Assistnat 2 for both controller & drone.
Problem persist.

Also, please suggest if any after sales support in India.

Regards,
Sumant Bhide

Hi there. Thank you for reaching out and we're deeply sorry for the trouble. Can you please confirm if you are flying the unit indoors? If yes, kindly please try to fly the unit outdoors to see if the issue persists. You may also try to fly the unit to a different location and check. Please keep us posted. Thank you.

As suggested, I have tried flying drones are various location outside city limit. I can latch onto 20 to 30 satellites.
But still, "Home point is not getting updated" once I start to fly & manual flying leads to Attitude mode, drifting in wind speed.

It looks like, GPS module is working whereas, configuration or locking of GPS is concern.

I encountered the same issue. Is this issue fixed?

djiuser_uBrQx8DT7JoM Posted at 4-4 00:10
I encountered the same issue. Is this issue fixed?

Hi there. Thanks for reaching out, and we're sorry for the inconvenience. May we confirm if you're having the error code 30008 as well, or hovering issues? We'll be waiting for your confirmation.

DJI Tony Posted at 4-4 00:42
Hi there. Thanks for reaching out, and we're sorry for the inconvenience. May we confirm if you're having the error code 30008 as well, or hovering issues? We'll be waiting for your confirmation.

Yes I'm having 30008 error

djiuser_uBrQx8DT7JoM Posted at 4-4 00:53
Yes I'm having 30008 error

Thanks for confirming. Kindly ensure that the drone's firmware is the latest and launch in an area with good GPS signal. If the issue remains, please let us know.

I have the same error 30008 with my Mini 3 Pro since the beginning.