Overview

• Date: 2023.09.14
• Aircraft Firmware: v01.00.0300
• DJI RC-N1 Remote Controller Firmware: v04.16.0400
• DJI RC Remote Controller Firmware: v01.03.0500
• DJI Fly App iOS: v 1.11.4
• DJI Fly App Android: v 1.11.4
  

What's New

• Fixed some minor bugs.
  

Notes

• If update fails, restart aircraft, remote controller, and DJI Fly or DJI Assistant 2 (Consumer Drones Series), and retry.
  

Humm, my Aircraft Firmware says 01.00.0600 at 2:05PM EDT today
EDIT - My Bad. I thought I was in the Mini 3 PRO forum. My Mini 3 Pro firmware is v01.00.0600. Sorry if I confused anybody.

eruby Posted at 9-15 10:06
Humm, my Aircraft Firmware says 01.00.0600 at 2:05PM EDT today
EDIT - My Bad. I thought I was in the Mini 3 PRO forum. My Mini 3 Pro firmware is v01.00.0600. Sorry if I confused anybody.

Hi there, the above announcement is for the DJI Mini 3.

Please no worries, for the DJI Mini 3 Pro, the latest version now is v01.00.0600.

I still don't see that remote control firmware update, it's stuck on v04.16.0300

Gabriel Macho Posted at 9-16 04:04
I still don't see that remote control firmware update, it's stuck on v04.16.0300

Hi, Gabriel. Thank you for reaching out and we're sorry for the inconvenience. Please try to update using the DJI Assistant 2 (Consumer Drones Series). Please keep us posted.

DJI Gamora Posted at 9-16 08:34
Hi, Gabriel. Thank you for reaching out and we're sorry for the inconvenience. Please try to update using the DJI Assistant 2 (Consumer Drones Series). Please keep us posted.

Nothing happen

Gabriel Macho Posted at 9-16 21:34
Nothing happen [view_image]

Thank you for the screenshot, Gabriel. Have you tried updating via the app? Please connect your phone to the RC-N1 and go to About Settings of DJI Fly to perform an update.

Anything new?

DJI Gamora Posted at 9-17 07:50
Thank you for the screenshot, Gabriel. Have you tried updating via the app? Please connect your phone to the RC-N1 and go to About Settings of DJI Fly to perform an update.

Yes i did, no updates so far...

Strange, I successfully updated 2 days ago.

Fixed some minor bugs

What bugs? I hope oversharpened video is called a 'bug' by DJI, like many for us.Or add the missing 'brake sensitivity'.
thanks!

Gabriel Macho Posted at 9-17 19:48
Yes i did, no updates so far...

Thank you for the reply. Please try to refresh the firmware using the DJI Assistant 2 then disconnect the RC-N1 from your computer to check if the new firmware will come up. Please keep us posted. Thank you.

I just updated the firmware v01.00.0300 of my mini 3, then I started to look through the settings and I discovered the new feature (Frame Guides) released on Mavic 3 series drones. I don't know if this one was already in settings or if it's a new one on Mini 3.

Instead of frame guides, DJI please lower video sharpening!
Less work!! Just change or let us change that parameter!
thanks

DJI Gamora Posted at 9-18 07:27
Thank you for the reply. Please try to refresh the firmware using the DJI Assistant 2 then disconnect the RC-N1 from your computer to check if the new firmware will come up. Please keep us posted. Thank you.

It is probably a generalized problem, since although my drone was updated correctly, there is no way for my control, it simply does not detect that this update exists. I attached a screenshot, I already tried from the app and from the PC.

Jose Arturo Bonilla L. Posted at 9-18 21:19
It is probably a generalized problem, since although my drone was updated correctly, there is no way for my control, it simply does not detect that this update exists. I attached a screenshot, I already tried from the app and from the PC.[view_image]

Hi, Jose. Thank you for reaching out. Have you tried refreshing the firmware of the controller as mentioned in the post that you've replied to? Please keep us posted.

Can we get a firmware release to decrease sharpening?

relaxosmo Posted at 9-18 11:24
Instead of frame guides, DJI please lower video sharpening!
Less work!! Just change or let us change that parameter!
thanks

Hi, relaxosmo. Thank you for reaching out. We'd like you to know that we appreciate your valuable suggestions. We will forward your concern to our related department. After the evaluation of the related department, significant suggestions or requests will be implemented via the firmware update, app update, etc. For any updates, please stay tuned to the latest news on our DJI official website at (www.dji.com) or by checking the Release Notes specific to your product. Thank you for your continued support.

Also; this firmware version introduces a bug for this situation:
If you have a new RC Pro and a new Mini 3 Pro, you can't bind before updating the RC Pro firmware, but in this latest version binding with a Mini 3 Pro has stopped working.
The fix is to connect the RC Pro to DJI Assistant 2, update the RC Pro to the previous firmware, bind the drone and RC and then lastly update both to the latest firmware.

davitzakari Posted at 9-18 08:46
I just updated the firmware v01.00.0300 of my mini 3, then I started to look through the settings and I discovered the new feature (Frame Guides) released on Mavic 3 series drones. I don't know if this one was already in settings or if it's a new one on Mini 3.

Hi, davitzakari. Thank you for reaching out. We'll forward this to our relevant team for confirmation. Can you please provide the Serial number of the drone or a screenshot of the About interface (showing the firmware and model) of the app? Please send the details via PM. Thank you.

davitzakari Posted at 9-18 08:46
I just updated the firmware v01.00.0300 of my mini 3, then I started to look through the settings and I discovered the new feature (Frame Guides) released on Mavic 3 series drones. I don't know if this one was already in settings or if it's a new one on Mini 3.

Hi, davitzakari. No need to provide the details above. We have confirmed that this Frame Guide is a function of the DJI Fly app, and not only applies to the Mavic 3 series. When you update the aircraft to a new version, it will display under settings when you use it with the DJI Fly v1.11.4 or above. Hope this helps.

I still can't update my DJI RC-N1 control, there is no way to update at .0400, I'm still at .0300 and there's no way I've been able to get the update to happen, I've already tried it from the app on Android, and with the DJI Assistant, does anyone else have this problem or is it just happening to me?

can no longer transfer media since update.I recieve an error message.
"No aircraf found" when trying to connect to DJIFly app.