Hi , i would like to know what plug system you use on the video and power cable from the X3 Gimbal, since we would like to make a splitter so
it makes it possible to have a X3 and N1 Video encoder hocked up.

Best regards


Oliver

You do not need a splitter.  The X3 connects to one set of connectors and the Encoder connects through another set.

Dear  Tahoe_Ed ,

nice that some one responds here in the Forum,  but do you ever put together a Matrice 100 ? and if so please advice me with wisdom where to find 2 sets of ports on the N1 Flight controller.

So that i can plug the X3 Gimbal and the Videodecoder in at the same time.  So my question would be better answered , by telling me what kind of plugs that are or better to tell me the pinout from the N1 flight controller, i would be willing to sign a NDA for that purpose

Best regards

Oliver Rennfort

Tahoe_Ed Posted at 2015-9-7 07:33
You do not need a splitter.  The X3 connects to one set of connectors and the Encoder connects throu ...

please advice me with where to find 2 sets of ports on the N1 Flight controller.

So that i can plug the X3 Gimbal and the Videodecoder in at the same time.

Tahoe_Ed Posted at 2015-9-7 07:33
You do not need a splitter.  The X3 connects to one set of connectors and the Encoder connects throu ...

so you say I can hook up all 4 cables at the same time to the N1

any news and pics on this

mmm then (dji N1 Video Encoder) could easily install the video encoder in my inspire 1 v2?

thank you