I have P3 standard. It's a good device for shoorting however there is one drawback and that is, the camera control and the aricraft control are coupled. That is, to move the camera to sides, we need to do Yaw on the aicraft (the pitch control of the camera is decoupled, though).
I'm wondering if there is any way to program the aircraft (using GPS signal), so it could fly autonomously a certain path (for example, flying on a circular path)

Toworrow there will be an upgrade which brings in that functionality

Swedrone Posted at 2015-9-6 12:09
Toworrow there will be an upgrade which brings in that functionality

Really?! even for the standard ones?

amin67r@gmail.c Posted at 2015-9-6 07:55
Really?! even for the standard ones?

Yes.         

aopisa Posted at 2015-9-6 15:48
Yes.

how should I upgrade my P3 then?
The Go App doesn't notice any new firmware updates

amin67r@gmail.c Posted at 2015-9-6 19:33
how should I upgrade my P3 then?
The Go App doesn't notice any new firmware updates

Wait until monday and the app will uppdate it self.

Swedrone Posted at 2015-9-6 20:12
Wait until monday and the app will uppdate it self.

Ok i have now upgraded to the newest firmware
But how do you specify the flight route and orientations? i don't  see any panel or new button for it in the DJI Go app even in the Map view.

amin67r@gmail.c Posted at 2015-9-9 18:42
Ok i have now upgraded to the newest firmware
But how do you specify the flight route and orientat ...

Hi, Have you seen Sploodge's great writeup which may help...

Ground Station

amin67r@gmail.c Posted at 2015-9-9 19:42
Ok i have now upgraded to the newest firmware
But how do you specify the flight route and orientat ...

switch to flight mode "F" and the icon will show

Swedrone Posted at 2015-9-9 23:29
switch to flight mode "F" and the icon will show

I'm using P3 standard and android device. But there is no "F" mode?!
where is this? I looked the tutorial but i think it is only for P3 advance

amin67r@gmail.c Posted at 2015-9-10 10:20
I'm using P3 standard and android device. But there is no "F" mode?!
where is this? I looked the  ...

again amin67r, did you read the post by sploodge? the link is above.

quickly:

if all is up to snuff with firmware, which i guess it should be on the P3 Standard
update your app
(with your device connected to the rc & rc connected to the P3) in the app, under MC Settings/ Advanced Settings turn on multiple flight mode.
launch your P3 into the air, hover somewhere safe...
then on your rc, switch the toggle switch to the F position

you should now see the new features dialog box pop up
edit: here is the link to the DJI video tutorials for the Standard

Flyhigh7887 Posted at 2015-9-10 10:59
again amin67r, did you read the post by sploodge? the link is above.

quickly:

Thanks for the prompt reply, but then thing is that in my RC there is no such a switch. I'm not sure if you have seen this new RCs, it's quite different from prevous versions. There are only two switches at the corner of the RC and that's all.

Ops sorry I just noticed how to do that. it's just the right switch on the RC

amin67r@gmail.c Posted at 2015-9-10 18:05
Ops sorry I just noticed how to do that. it's just the right switch on the RC

Happy that you found it. Let us know how it goes.