Please select Into the mobile phone version | Continue to access the computer ver.
HOW TO: Setup and use Home Lock
2643 2 2015-9-7
Uploading and Loding Picture ...(0/1)

United States

Follow the steps below to setup and use the Home Lock feature in the DJI GO app. If you have additional tips or information below, please comment below.

Launch the Home Lock feature.

1) Your Inspire needs to be started and in the air before you'll be able to access the Home Lock feature in the DJI GO app. Start your Inspire, take off, and fly out a few hundred feet to a location that is above all obstacles.

Important: If you need to use home lock in a scenario where you cannot physically see your Inspire, it's a good idea to push the left stick up to raise it to an altitude that you are sure will be above all obstacles that will be passed as your Inspire returns to the home point.

2) Flip the PAF switch to the "F" position to access the IOC features. If Multiple Flight Mode is not enabled, you're going to see the following prompt:

If you see the above prompt, click the "OK" button to enable Multiple Flight Mode.

3) Select "Home Lock" from the IOC menu.

Engage the Home Lock feature.

4) Click the "Apply" button to engage the Home Lock feature.

Bring your Inspire home.

5) At this point, Home Lock is enabled and your Inspire is waiting for your command. Pull down on the right stick to start moving your Inspire toward the home point.

Note: It does not matter which direction your Inspire is facing -- it'll move toward the home point.

6) Click the "Exit" button to disable the home lock function and allow your Inspire to start traveling in the direction it's facing. You can also exit by flipping the PAF switch back to the "P" position.
Find the latest must-haves, fixes, mods, how-tos, guides, and accessories for your Inspire.
Inspires in stock and ready to ship worldwide! (see availability)

Use props
Flight distance : 343848 ft
United Kingdom

Further to the above can you just confirm something.

When setting Home Lock in the App why does this not retain that setting for the F mode, so that when flicking from Atti or GPS modes to F, it automatically enters the Home Lock allowing you to pull back on the right stick to bring home without having to select the Hime point all over again.  It would seem that once you leave the F mode into GPS or ATTI it loses the setting requiring you to enter and apply the mode again to initiate the Home Lock.

I haven't used these features for a while now but this used to be the case when using the IOC function, in that once set, you could return to the F mode at any point from ATTI or GPS.  Now it seems that you have to select the Home Lock via the App after selecting F mode each time.  Is this correct or is this a bug in  the new update?  

I remember using the IOC function all the time.  I even had this in my checklist to reset orientation of aircraft in the IOC just after take-off, as a precautionary measure to recover orientation if lost.  More of a safety feature than anything else.

Currently running v1.6 on iOS, with Inspire 1 and X3

Would appreciate your comments.

Use props
Flight distance : 1711394 ft

A useless feature that is badly implemented.
Tried it, never used it since.
Use props
You need to log in before you can reply Login | Register now

Credit Rules