DJI Support
 Administrator
Flight distance : 2408 ft
Hong Kong
Offline
|
Overview
- Date: 2024.11.28
- Dock Firmware: v 10.01.3205
- Aircraft Firmware: v 10.01.3205
- Intelligent Flight Battery: v 26.03.00.48
- Remote Controller Firmware: v 02.01.0517
- DJI Pilot 2 App: v10.1.8.17
- DJI Assistant 2 (Enterprise Series): v2.1.12
- Firmware Update Method Dock: DJI FlightHub 2 / DJI Assistant 2
- Aircraft: DJI FlightHub 2 / DJI Assistant 2 / App
- Remote Controller: DJI Assistant 2 / App
- The built-in DJI Pilot 2 App: will be updated with the Remote Controller firmware
* Make sure to update the firmware version for the aircraft, the remote controller, and the dock. Otherwise, they will not be compatible with each other.
What’s new
- Added support for subscribing to Device Information Notifications. Results of an issue report will be notified through e-mails, and users can view assessment results in DJI FlightHub 2.
- Added support for Vision Assist in DJI FlightHub 2, which can assist in observing the environment and obstacles in the direction of flight.
- Added support for Emergency Landing. Users can land the aircraft in DJI FlightHub 2 in case of an emergency. The aircraft is unable to take off again after the emergency landing. Use with caution.
- Added support for keeping the beacon on when the aircraft is powered off and on again after the beacon has been enabled.
Notes:
To ensure safe use and efficient operation, it is recommended to visit the links below for a comprehensive understanding on safety and product information:
Overview
- Date: 2024.11.07
- Dock Firmware: v10.01.3205
- Aircraft Firmware: v10.01.3205
- Intelligent Flight Battery: v26.03.00.48
- Remote Controller Firmware: v02.01.0515
- DJI Pilot 2 App: v10.1.8.1
- DJI Assistant 2 (Enterprise Series): v2.1.12
- Firmware Update Method Dock:
- DJI FlightHub 2 / DJI Assistant 2
- Aircraft: DJI FlightHub 2 / DJI Assistant 2 / App
- Remote Controller: DJI Assistant 2 / App
- The built-in DJI Pilot 2 App: will be updated with the Remote Controller firmware
* Make sure to update the firmware version for the aircraft, the remote controller, and the dock. Otherwise, they will not be compatible with each other.
What’s new
- Added support for subscribing to Device Information Notifications. Results of an issue report will be notified through e-mails, and users can view assessment results in DJI FlightHub 2.
- Added support for Vision Assist in DJI FlightHub 2, which can assist in observing the environment and obstacles in the direction of flight.
- Added support for Emergency Landing. Users can land the aircraft in DJI FlightHub 2 in case of an emergency. The aircraft is unable to take off again after the emergency landing. Use with caution.
- Added support for keeping the beacon on when the aircraft is powered off and on again after the beacon has been enabled.
Notes:
To ensure safe use and efficient operation, it is recommended to visit the links below for a comprehensive understanding on safety and product information:
Overview
- Date: 2024.10.15
- Dock Firmware: v 10.01.1612
- Aircraft Firmware: v 10.01.1612
- Intelligent Flight Battery: v 26.03.00.48
- Remote Controller Firmware: v 02.01.0507
- DJI Pilot 2 App: v 10.1.0.30
- DJI Assistant 2 (Enterprise Series): v 2.1.12
- Firmware Update Method:
- Dock: DJI FlightHub 2 / DJI Assistant 2
- Aircraft: DJI FlightHub 2 / DJI Assistant 2 / App
- Remote Controller: DJI Assistant 2 / App
- The built-in DJI Pilot 2 App: will be updated with the Remote Controller firmware
* Make sure to update the firmware version for the aircraft, the remote controller, and the dock. Otherwise, they will not be compatible with each other.
What's new
- Fixed some known issue of the dock.
Notes:
To ensure safe use and efficient operation, it is recommended to visit the links below for a comprehensive understanding on safety and product information:
Overview
- Date:2024.07.30
- Dock Firmware:v 10.01.1607
- Aircraft Firmware:v 10.01.1607
- Intelligent Flight Battery:v 26.03.00.48
- Remote Controller Firmware:v 02.01.0507
- DJI Pilot 2 App:v 10.1.0.30
- DJI Assistant 2 (Enterprise Series):v 2.1.12
- Firmware Update Method
- Dock: DJI FlightHub 2 / DJI Assistant 2
- Aircraft: DJI FlightHub 2 / DJI Assistant 2 / App
- Remote Controller: DJI Assistant 2 / App
- The built-in DJI Pilot 2 App: will be updated with the Remote Controller firmware
* Make sure to update the firmware version for the aircraft, the remote controller, and the dock. Otherwise, they will not be compatible with each other.
What’s new
DJI Dock 2
- Optimized the battery charging logic.
- Fixed some minor bugs.
Notes:
To ensure safe use and efficient operation, it is recommended to visit the links below for a comprehensive understanding on safety and product information:
Overview
- Date:2024.07.18
- Dock Firmware:v 10.01.16.04
- Aircraft Firmware:v 10.01.16.04
- Intelligent Flight Battery:v 26.03.00.47
- Remote Controller Firmware:v 02.01.0400
- DJI Pilot 2 App:v 10.0.6.10
- DJI Assistant 2 (Enterprise Series):v 2.1.12
- Firmware Update Method
- Dock: DJI FlightHub 2 / DJI Assistant 2
- Aircraft: DJI FlightHub 2 / DJI Assistant 2 / App
- Remote Controller: DJI Assistant 2 / App
- The built-in DJI Pilot 2 App: will be updated with the Remote Controller firmware
* Make sure to update the firmware version for the aircraft, the remote controller, and the dock. Otherwise, they will not be compatible with each other.
What’s new
DJI Dock 2
- Added support for Multi-Dock tasks. The aircraft will take off from one dock and land in another dock, allowing for flight tasks in large areas with long distances.
- Added support for embedding subtitles in videos captured by the aircraft. Downloading and playing the video files with embedded subtitles to your local PC are also supported.
- Added the logic to trigger RTH if the dock network connection fails during flight.
- Optimized vision detection logic for propellers to perform the detection process after the aircraft lands.
- 4G private deployment supports the configuration of different IP addresses for the aircraft and the dock.
DJI FlightHub 2
- Optimized flight route functions:
- Added support for geometric routes and slope routes in flight route library for prism- or cylinder-shaped structures mapping and slope mapping.
- Added support to set Panorama when taking photos in Waypoint Route.
- Added support to automatically resume the aircraft camera and gimbal status at the breakpoint when resuming a task from breakpoint.
- Optimized functions for Live Flight Controls. Refer to the DJI FlightHub 2 Release Note for more information.
Overview- Date:2024.05.13
- Dock Firmware:v 10.00.0609
- Aircraft Firmware:v 10.00.0609
- Intelligent Flight Battery:v 26.03.00.44
- Remote Controller Firmware:v 02.01.0400
- DJI Pilot 2 App:v 10.0.6.10
- DJI Assistant 2 (Enterprise Series):v 2.1.12
- Firmware Update Method
- Dock: DJI FlightHub 2 / DJI Assistant 2
- Aircraft: DJI FlightHub 2 / DJI Assistant 2 / App
- Remote Controller: DJI Assistant 2 / App
- The built-in DJI Pilot 2 App: will be updated with the Remote Controller firmware
* Make sure to update the firmware version for the aircraft, the remote controller, and the dock. Otherwise, they will not be compatible with each other.
What’s new
Dock
Notes:
To ensure safe use and efficient operation, it is recommended to visit the links below for a comprehensive understanding on safety and product information:
Overview
- Date:2024.04.28
- Dock Firmware:v 10.00.0605
- Aircraft Firmware:v 10.00.0605
- Intelligent Flight Battery:v 26.03.00.44
- Remote Controller Firmware:v 02.01.0400
- DJI Pilot 2 App:v 10.0.6.10
- DJI Assistant 2 (Enterprise Series):v 2.1.12
- Dock: DJI FlightHub 2 / DJI Assistant 2
- Aircraft: DJI FlightHub 2 / DJI Assistant 2 / App
- Remote Controller: DJI Assistant 2 / App
- The built-in DJI Pilot 2 App: will be updated with the Remote Controller firmware
* Make sure to update the firmware version for the aircraft, the remote controller, and the dock. Otherwise, they will not be compatible with each other.
What’s new
Dock
- Added support for Remote ID requirements of some countries and regions. Update the firmware of the aircraft if a Remote ID Error prompt appears on the Online Devices panel in DJI FlightHub 2.
Notes:
To ensure safe use and efficient operation, it is recommended to visit the links below for a comprehensive understanding on safety and product information:
Overview
- Date:2024.04.07
- Dock Firmware:v 09.02.0108*
- Aircraft Firmware:v 09.02.0108*
- Intelligent Flight Battery:v 26.03.00.44
- Remote Controller Firmware:v 02.01.0322*
- DJI Pilot 2 App:v 9.2.0.26
- DJI Assistant 2 (Enterprise Series):v 2.1.12
- Firmware Update Method
- Dock: DJI FlightHub 2 / DJI Assistant 2
- Aircraft: DJI FlightHub 2 / DJI Assistant 2 / App
- Remote Controller: DJI Assistant 2 / App
- The built-in DJI Pilot 2 App: will be updated with the Remote Controller firmware
* Make sure to update the firmware version for the aircraft, the remote controller, and the dock. Otherwise, they will not be compatible with each other.
What’s new
Dock
- Added support for Trial Flight. Users can assess the task performance and media file transfer performance after completing dock configuration.
- Added support for Silent Mode. In Silent Mode, the operation noise will be reduced and the cooling performance of the air conditioning system will be slightly affected.
- Added support for transferring and managing the unlocking licenses and updating flight safety database in DJI FlightHub 2.
- Added support for switching between camera views in the dock liveview to check inside or outside the dock.
- Added support for Flight Trajectory Playback. Users can view the flight trajectory in the Task Plan Library after a planned task is completed.
- Optimized functions for Live Flight Controls. Refer to the DJI FlightHub 2 Release Note for more information.
Notes:
To ensure safe use and efficient operation, it is recommended to visit the links below for a comprehensive understanding on safety and product information:
|
|
