Please select Into the mobile phone version | Continue to access the computer ver.
Z15 GH4(HD) problem; please help
1745 10 2014-12-13
Uploading and Loding Picture ...(0/1)
o(^-^)o
anthony.kolenbe
lvl.1

Suriname
Offline

Hi,

After powering up everything the gimbal just starts turning and turning non stop.
It wont initialize also. This problem just occurred today.
Before it was working perfectly. The firmware is all up to date 2.2.
I have checked all connections and everything is ok.

Please help.
2014-12-13
Use props
anthony.kolenbe
lvl.1

Suriname
Offline



this is a video of the problem to get a better idea
2014-12-13
Use props
anthony.kolenbe
lvl.1

Suriname
Offline

Anybody? i'm really stuck with this problem... have a lot of films to do in the upcoming two weeks.
Really need a solution. Please any advice
2014-12-15
Use props
lenakakis123
lvl.3
Flight distance : 178058 ft
Greece
Offline

anthony.kolenbe Posted at 2014-12-16 07:34
Anybody? i'm really stuck with this problem... have a lot of films to do in the upcoming two weeks.  ...

Try to update again the GSU and IMU, if again have problem contact with your seller .

Christian
2014-12-16
Use props
anthony.kolenbe
lvl.1

Suriname
Offline

lenakakis123 Posted at 2014-12-16 18:48
Try to update again the GSU and IMU, if again have problem contact with your seller .

Christian  ...

Thank you for the reply.
When updating, it just shows the same software. Should i just run it again?

thank you
2014-12-16
Use props
lenakakis123
lvl.3
Flight distance : 178058 ft
Greece
Offline

anthony.kolenbe Posted at 2014-12-17 05:48
Thank you for the reply.
When updating, it just shows the same software. Should i just run it aga ...

Yes, run again the update for GSU & IMU.
Remove and connect all your cables again ( on zenmuse)

Christian
2014-12-17
Use props
stephanreichegg
lvl.1
Flight distance : 232513 ft
Italy
Offline

Hello.

The compass must not lie!
2014-12-17
Use props
DJI-Autumn
First Officer

China
Offline

How about changing the CAN port or CAN cable?
2014-12-18
Use props
Blade_Strike
First Officer
Flight distance : 872694 ft
  • >>>
United States
Offline

It almost looks like the roll motor is not getting power... Can you tell if roll is even trying to engage?
2014-12-18
Use props
anthony.kolenbe
lvl.1

Suriname
Offline

I've run all the updates and still the same problem. checked all connections again (disconnecting and reconnecting).
I am not feeling any roll engagement at all.
do you think that changing the can port cable will help? I don't know if that is allowed?
Also on the Zenmuse I see that for all the connections there are two ports of the same? can I try changing that or does that not make any sense
2014-12-18
Use props
Blade_Strike
First Officer
Flight distance : 872694 ft
  • >>>
United States
Offline

If roll isn't trying to activate then I think that might be the issue. It's trying to perform a calibration and cant since roll is dead.
2014-12-18
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules