Hi all

A few days ago, my mini 3 pro RC controller started randomly beeping while being held. Some of these beeps result in the camera rotating or the gimbal moving up/down.  Basically it's like using the C1 and C2 buttons constantly.  The controller didn't suffer any damage.
I have tried recalibrating the RC, and all the drone calibration options.  I have reset the controller to default factory settings. I have disabled C1/2 buttons. Nothing seems to work.  The RC firmware is up to date 01.03.1700, and aircraft is 01.00.0900.

Has any one experienced this, or have any suggestions?

Thanks!

forget this post, you have already done what I was going to suggest.

Hi there,
thank you for reaching out.

Please let us know if you are receiving any error messages or codes in the DJI Fly application when this issue arises. Additionally, could you provide a video so we can verify if the problem continues?

Please keep us posted. Thank you.

DJI Diana Posted at 8-30 01:33
Hi there,
thank you for reaching out.

Hi Diana
There are no error codes. Here’s a link to a short video of the issue. The drone is not connected, but when it is some of these beeps result in the C1 or C2 button being activated so i had to disable them.
https://www.amazon.com/photos/shared/IuR5ujrfRRq7VXKP_gNJ8g.SdAZ9xFcA3doN4gV539skJ

DJI Diana Posted at 8-30 01:33
Hi there,
thank you for reaching out.

I have exactly the same issue

djiuser_kwA9EoRPMHtS Posted at 11-12 12:36
I have exactly the same issue

Hi there,
thank you for reaching out.

We apologize for the inconvenience. Could we confirm whether the issue is the same as that described by the original poster, or could you possibly share a video of the problem?

Please keep us updated.

Flysd92 Posted at 9-21 17:57
Hi Diana
There are no error codes. Here’s a link to a short video of the issue. The drone is not connected, but when it is some of these beeps result in the C1 or C2 button being activated so i had to disable them.
https://www.amazon.com/photos/shared/IuR5ujrfRRq7VXKP_gNJ8g.SdAZ9xFcA3doN4gV539skJ

Hi there,
thank you for reaching out.

We apologize for the delayed response. Try pressing the C1 or C2 button a few times to see if it returns to normal.

Please keep us posted.