Please select Into the mobile phone version | Continue to access the computer ver.
New transmitter upgrade problem with camera tilt
717 3 2015-11-11
Uploading and Loding Picture ...(0/1)
o(^-^)o
Starship
Second Officer

United States
Offline

So, I finally got around to doing the Inspire 1 transmitter software upgrade.  Now when I try to tilt the camera down it only works if I move the dial "slightly".  If I move the dial to the full down position, nothing happens.  Up works fine.  Everything else seems to work OK too.

The camera tilt worked fine before the software upgrade.

Any ideas?


PS I did have to do the upgrade twice.  The first time, the transmitter wouldn't connect to the inspire.
2015-11-11
Use props
DJI-Tim
DJI team

Hong Kong
Offline

Please work on a advanced gimbal settings: Gimbal Pitch EXP and Gimbal Pitch Smooth 1485262843.jpg
2015-11-11
Use props
Starship
Second Officer

United States
Offline

I would do that if I could.  I don't seem to have those features.  I'm running IOS, and the latest DJI Go.  Am I missing something here?


2015-11-12
Use props
Starship
Second Officer

United States
Offline

I got it figured out, even though my menu doesn't look like that.  

I went into the RC settings, and the gimbal speed was set to 100.  I turned that down to 60.  Then I went into the gimbal settings and advanced and set the pitch exp to 14. That corrected the dial not responding to full down, and gave me my smooth tilt transition.
2015-11-12
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules