Looking for some help...  I was flying my inspire 1 today...  Was toggling between videos and pictures...  Took about 18 pictures and 2 2 minute videos...

On 2 different occasions I received the WARNING - Gimbal is overheating...   I am also noticed that while the Inspire 1 was turning and thus the Gimbal seeing a different view as I turned...  This was not reflecting on my remote/Ipad touch...  There would be a 10-15 second lag before it caught up...

Any help really appreciated!

Please check to see if the fan is working on the camera. Also check the pins from the canopy to the camera.

teamnest1 Posted at 2015-11-22 21:27
Please check to see if the fan is working on the camera. Also check the pins from the canopy to the  ...

Thank you!  Stupid question...  How do I tell if the fan is working?

Wolf1 Posted at 2015-11-23 11:44
Thank you!  Stupid question...  How do I tell if the fan is working?

it sounds like a turning fan on a back side of camera

On the back side of the camera you will see a circular vent hole. Inside that, their will be WHITE fan blades. That is the fan. It should be on when the aircraft is powered on.