My DJI Phantom 2 beeps on startup and motors won't turn on?When I start up my phantom it just has a "beep beep beep beep" and won't stop, can't power up the motors at all, I crashed it once and that's it from like 10 feet but I need help, just got it today

What color lights are flashing on your Phantom?

Sometimes fast yellow somethimes nothing

chenzobianco@gm Posted at 2014-12-26 08:11
Sometimes fast yellow somethimes nothing

When you crashed, did it flip and land on the top?

The ESC portion of this chart came from a Phantom 1 manual

Gerry1124 Posted at 2014-12-26 08:20
When you crashed, did it flip and land on the top?

hijacking this thread... sorry.  In my case yes it went upside down and I have continuous beeps.  I can get all rotors to power up except one??

scroogled100@gm Posted at 2014-12-26 10:48
hijacking this thread... sorry.  In my case yes it went upside down and I have continuous beeps.   ...

What do you mean by hihacked?  I guess you don't need all the help you can get.

Gerry1124 Posted at 2014-12-26 10:53
What do you mean by hihacked?  I guess you don't need all the help you can get.

No meaning I need all the help I can get... just using someone else's thread and question to post my own question.  Thus "hijacking" the thread.  So if you have some ideas or suggestions they would be greatly appreciated.  Thanks

scroogled100@gm Posted at 2014-12-26 11:22
No meaning I need all the help I can get... just using someone else's thread and question to post  ...

Well, if you landed upside down and 1 motor will not start now, you probably burned out the ESC.

Gerry1124 Posted at 2014-12-26 11:32
Well, if you landed upside down and 1 motor will not start now, you probably burned out the ESC.

Thanks.  is there any diagnostic utility available for DL that would indicate that problem?

scroogled100@gm Posted at 2014-12-26 12:41
Thanks.  is there any diagnostic utility available for DL that would indicate that problem?

Not at the present.  You cab take off the cover and look at it to see if any burnt spots on the ESC.

scroogled100@gm Posted at 2014-12-26 12:41
Thanks.  is there any diagnostic utility available for DL that would indicate that problem?

And if your ESC burnt out it would release a special smell like disinfectant, and smoke.

Hello. Can anyone help. I've just replaced all motors on my phantom 2 (to 2312) as the originals were damaged after removing the prop guards and then reinstalling the long screws that dug into the motor coils but now it doesn't make any beeping sounds when I turn it on. There is only a very abrupt flash and then 3 red flashes followed by a green flash (this sequence repeats itself) The new motors won't start. Any suggestions?

Is it a P2 or P2 Vision PLus?  Have you checked the led flash sequences in the P2 manual?