While doing the latest firmware update "v1.6.0040", Should the light go solid red and the beeping change to a constant beep?

Should I stop it an try again??

Well i stopped it and retried
Now here is what the text file says?

What do I do now?

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

OK went back to v1.5.0030. This one installed without any problem.
So I'm going to try V01.06.0040 again.

That worked

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...
Result: Success.

Somehow the first time didn't work, next time that happens, instead of downgrading then upgrading try to reformat the SD card and put only the BIN file on the card and see if that works.
Glad your bird is ready to fly.

I have the same problem when installing the V01.06.0040 version. After a few minutes gets a continuous BEEEPPP.

Already tried:
a) Put the Version 1.05
b) Format and put the version 1.6
c) Format and put the Version 1.05
d) Download the entire battery and try again.
e) Wait for more than 1 hour with continuous BEEEP

The error is always the same.

========== 01/01/2014 00:00:22 remo-con disconnect ======
Packet: P3S_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.