Please select Into the mobile phone version | Continue to access the computer ver.
Mount Extension Rod on Industry Standard Tripod
1169 2 2015-12-30
Uploading and Loding Picture ...(0/1)
o(^-^)o
kneverett
lvl.4
United States
Offline

I would like to be able to mount my extension rod on an industry standard photography tripod.  Most higher end tripods have a mounting screw on the base plate which allow swapping out different heads.  I would like to take the head off my camera tripod and mount the Osmo extension rod.  However, the thread for the extension rod is "non-standard".  Are there any adapters available?

Yes, I am aware of the Osmo specific tripod accessory.  But frankly it just does not compare to a Manfrotto or Gitzmo tripod.
2015-12-30
Use props
kneverett
lvl.4
United States
Offline

Okay, I answered my own question - sort of.

I decided to try using the quick release plate on my DSLR head for my tripod.  The size and thread of the screw used to attach it to the bottom of the camera matches the extension rod handle.  That much is good.  I'd still rather have a direct mount onto the base plate for a more stable foundation.
2015-12-30
Use props
DJI-Amy
DJI team

Hong Kong
Offline

Hi, the Osmo extension rod base plate use the standard 1/4 inch screw.
2015-12-30
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules