LightBtidge FW Updata Air system encoder* v1.1.10

I've updated there is a problem.

If the GoPro4 the recording state by setting the 4K 30fps, the external monitor OSD is hidden.Image was to come, but also one problem.
Monitor okay in App.

http://youtu.be/Qjpzn_ma85A

http://vimeo.com/115757485

I want you to release it from passing through the rigorous testing.
Please to fix it quickly

I am having the same problem.
How did this problem get past the guys that programed this fix  
Just doesn't make any sense at all.
Did they even look at a monitor to make sure everything was working.
People are so lazy now days. Its happening all over the world, not just in the USA.

Rob

kelleyre@gmail. Posted at 2015-1-4 00:43
I am having the same problem.
How did this problem get past the guys that programed this fix  
Just  ...

The updated was all the target.

I just upgraded the LB air system software. Base station needs no update. SD works now.
I tested the Gopro 4Blk in 4K@30 and 1080p@120p, this time the picture didn't freeze when recording started. I have to live with SD resolution, but at least it's a 16/9 picture. Finally I can use the GP4Blk for aerials! Now Gopro has to fix the SD issue on their end.
I have only tested video through USB via app, but I assume HDMI should work as well for monitors...

dji Posted at 2015-1-8 07:54
I just upgraded the LB air system software. Base station needs no update. SD works now.
I tested th ...

Please tell me why the OSD is hidden.
And,
In 4K 30fps video recording state, can not be flight in hidden OSD be displayed video.
Please be early FIX.

Before you did the update, did you have the same issue?

when the gopro starts to record, it outputs a low resolution vidoe (D1) to LB, in this format, LB have no osd on it when output from hdmi, but you can get the osd on the APP.

DJI-Cathy Posted at 2015-1-20 18:04
Before you did the update, did you have the same issue?

Before the update I did not display the video nor OSD.
Although the video was displayed in an update, OSD disappears problem came out.
This is a symptom of LightBridge all users.
Confirmed in 10 units.

DJI-youzq Posted at 2015-1-20 19:55
when the gopro starts to record, it outputs a low resolution vidoe (D1) to LB, in this format, LB ha ...

That does not come out problems with tablet I know.
You can not do the job of flight in the tablet and App.
Severe flight requires a high brightness monitor of HDMI.

GoPro4 FW      HERO4 Black v02.00.00 | February 4, 2015

HDMI output drops to 480p while recording at 2.7K Settings.
OSD is hidden.

yooann Posted at 2015-1-21 18:48
That does not come out problems with tablet I know.
You can not do the job of flight in the tablet ...

GoPro outputs 1080p on the micro HDMI connection. This can be easily checked by connecting an Atomos Ninja Blade directly to the GPH4B. After the Firmware update, the iOS app can now display while the GPH4B is in record mode, but LB does not output to HDMI. I agree with yooann, you cannot do serious FPV flying with the USB output.

The problem maybe that LB cannot handle 1080p, the iOS signal seems to be 1080i.

DJI, we need a fix and Firmware update asap.