Inspire/Phantom 3 Simulator for your PC
Here is a quick guide on how to set up a pretty cool simulator on your computer for your I1 or P3. Go to: https://developer.dji.com/mobile-sdk/downloads/ and download the PC simulator and the WIN drivers (at the bottom)
Install the WIN drivers by extracting it and running the installer. Once this is done go ahead and install the PC simulator, making sure to read the manual. (Contains important tips to take note of) Once it is installed, plug your aircraft into your computer via the aircraft’s USB port. Not the camera port. Power on the aircraft, the remote. Once they have connected, start the simulator. Make sure your simulator displays your aircraft’s SN in the console or you may have to restart your aircraft and simulator. Click start simulation and the Display simulation. Once you are in you will be able to do a CSC and start the motors. Make sure your props are off just in case. Note:
In the instructions it says not to connect the Pilot app while running the simulator. I tried and it actually worked. You can switch into F mode and play around with POI, auto pilot and more. If you have any questions setting up, please leave a comment below and I will respond to you ASAP. You can also right click in the simulation and change camera settings. Happy Flying!
-Michael
|