Gimbal Twitching
2669 7 2015-1-10
Uploading and Loding Picture ...(0/1)
o(^-^)o
darrenrdavis1
lvl.1

United States
Offline

Has anybody had any issues with the gimbal on the Inspire?  Today, I was flying and the gimbal would intermittently twitch to the left.  Wind was mild (maybe 5 mph) at the most.  I have all the latest firmware, and have calibrated compass as well as basic and advanced calibration of the IMU.  I am uploading the video to Vimeo now.  Once it is uploaded, I will post a link to the video.

Thanks in advance.
2015-1-10
Use props
pete1144
lvl.3

United States
Offline

Yes...there are a few of us with a gimbal problem. You might want to look at my discussion...and give DJI a call on Monday...they will pay attention.
2015-1-10
Use props
travissrt
lvl.4
Flight distance : 68555177 ft
  • >>>
United States
Offline

Any chance you are accidentally hitting the C1 switch with your left hand?  The default setting is to snap the gimbal back to front so bumping that button can make it look like it twitches.  
2015-1-10
Use props
darrenrdavis1
lvl.1

United States
Offline

travissrt@gmail Posted at 2015-1-11 12:20
Any chance you are accidentally hitting the C1 switch with your left hand?  The default setting is t ...

I'm positive I am not getting the C1 switch.  It is definitely an issue with the gimbal.  5th total flight on the Inspire.  Here is a link to the video.

http://vimeo.com/116471559


2015-1-11
Use props
pete1144
lvl.3

United States
Offline

darrenrdavis1@g Posted at 2015-1-11 23:01
I'm positive I am not getting the C1 switch.  It is definitely an issue with the gimbal.  5th total ...

You probably aren't going to get any useful answers for this problem...outside of DJI. Please report it to them.
2015-1-11
Use props
mlglisson
lvl.4
Flight distance : 7782 ft
  • >>>
United States
Offline

darrenrdavis1@g Posted at 2015-1-11 23:01
I'm positive I am not getting the C1 switch.  It is definitely an issue with the gimbal.  5th total ...

Watched your video Yeah that bad news I hope it is corrected soon.
2015-1-11
Use props
Ozren
lvl.3

Croatia
Offline

@ darrenrdavis1 check the little pins on your Inspire 1, use your fingers and pull them up a bit, maybe your gimball is loosing contact like mine. I solved my issue with the pins, just pull them up a bit so they have better contact with the gimball.

Also, read this thread http://forum.dji.com/forum.php?m ... age%3D1&lang=en
2015-1-11
Use props
darrenrdavis1
lvl.1

United States
Offline

Ozren Posted at 2015-1-12 00:18
@ darrenrdavis1 check the little pins on your Inspire 1, use your fingers and pull them up a bit, ma ...

Thanks.  I will take a look
2015-1-11
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules