Hello

I need help to know  how to set up to set camera shooting and the gimball Ground Station program with the A2 controller And Z15 gimball.
The Groud Station manual is insufficient and does not have examples like i need or tutorials.
The reason that I want to program the Ground Station is that I want to use for photometric purpouse.
Let's assume that with Ground Station. We plan 20 waypoints. the flight speed is going to be for example 8 m/s and I want that when you reach the Waypoint number 1, start the camera to take photos every 15 m travel and to stop when waypoint number 20 is reached.
I need to know how to program this example or another and it is not clear for me how to do it.

Also I would like to know how to program the Gimball movement, for example reaching the waypoint 10 move the camera 15 ° downwards and turn right 20°.

Also I would like to know if it is possible the A2 controller to memorize the GPS coordinates and then export them with the application GPSEXPORTER

Thanks a lot

Hello

I need help to know  how to set up to set camera shooting and the gimball Ground Station program with the A2 controller And Z15 gimball.
The Groud Station manual is insufficient and does not have examples like i need or tutorials.
The reason that I want to program the Ground Station is that I want to use for photometric purpouse.
Let's assume that with Ground Station. We plan 20 waypoints. the flight speed is going to be for example 8 m/s and I want that when you reach the Waypoint number 1, start the camera to take photos every 15 m travel and to stop when waypoint number 20 is reached.
I need to know how to program this example or another and it is not clear for me how to do it.

Also I would like to know how to program the Gimball movement, for example reaching the waypoint 10 move the camera 15 ° downwards and turn right 20°.

Also I would like to know if it is possible the A2 controller to memorize the GPS coordinates and then export them with the application GPSEXPORTER

Thanks a lot