Mismo problema con Ph2 vision plus. no live stream

Mismo problema que todos....

EL MISMO PROBLEMA QUE TODO EL MUNDO, SOLO ME QUEDA PROBAR DESACTIVAR EL BLUETOOTH PERO NO CREO QUE SEA ESE EL PROBLEMA.
Same problem here. No FPV on P2V+.
Tried everything.
No good news.
Any help?
Or I must buy a new drone?

The phantom 3 Standard had this issue when I fix loaded it up after firmware update.

Though it in the freezer for a hour or two and then try it chances are it will work until warm again. DJI should have replaced all the video transmitters in these for free the are lemons.

spam@crossfamil Posted at 2016-1-31 14:05
I have the same problem but with a P2V - the livestream has stopped working. I last used my Phantom in November and when I went to fly this weekend I have no Live stream. Everything else is working.

  - Problem happens on both iPhone and iPad

Following the instructions in this video gave me live feed back ...
https://youtu.be/k2xWS5r1h1c

bnewsome@albion Posted at 2016-1-19 16:40
The last time I used the Phantom 2 was in October 2015 and it worked great.  Today...the same issue that has been documented so well here.  No FPV.  I followed all the recommendations and nothing has changed.  I even went out to the Apple App Store and purchased DJI Phantom Flight for $8.99 to see if it was something in the DJI Vision App, but no help there.  Waste of money for app.  

Anyone having any luck getting a fix for this.  It is a pile of junk without FPV.

This worked for me

fans99f36165 Posted at 2017-4-27 19:56
This worked for me

Sorry this worked for me
https://youtu.be/k2xWS5r1h1c

I have the same problem with my PV2+.
Subscribed to thread. The new WiFi module is very expensive for me. Waiting for cheapest solution

Hello, exact same problem for me.
I saw a solution on other forum that worked for me.
It seems that the micro sd card is part of the problem.
I removed it and i did a full format on pc (full not quick)
Now i got my videostream back

Hi, anyone here using a Samsung S6 Edge+ for their Phantom 3 Pro? I'm having trouble connecting the phone with RC/DJI Go. It doesn't show camera view, seems not allowing data transfer. Anyone got a fix?

My Phantom 2 Vision + live video has also failed.

I replaced the faulty WLAN/Video Module inside the drone with a (very expensive) one from eBay - that solved the problem and i got live video again.
To prevent the Module from burning again, i've renewed the thermal crease inside the WLAN/Video module and designed an special adaptor for a tiny active fan (15x15x4,5mm size) to active cool the Module.

I postet the adaptor file for the non-commercial use here to download: Go to Thingiverse and search for Thing 2419618 !

If you have no access to a 3D printer, you can eMail me under ruecker@rueckergruppe.de - maybe i can help! ;-)

I had the same problem of no live preview and  was solved by turning off  my home wireless router. I think  the home  and Phantom  wifi were on the same frequency.  Inexpensive fix for me.