I was updating the Phantom 3 Professional's firmware to 1.7.6 but I turned it OFF halfway through the process.
Now it makes this sound, and will not start the updating process, but recognises the SD card and files.
The gimbal light blinks RED.
TURN VOLUME DOWN. (Please excuse the wind noise at the beginning)
This is a brief from the Resuts Log back when it was working fine. The dates are random for some reason.
========== 2015.09.12 10:19:02 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2015.09.12 11:19:51 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2015.09.12 16:04:03 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2015.09.12 16:29:04 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
Below was my first attempt at FW1.7.6 on Sunday, April 3rd. I turned off the drone halfway through the successful upgrading procedure. Since that, it appears to detect the different update .bin files Dates reset back to 01/01/2014
So I have tried formatting the SD card, and placing different FW versions of the P3P .bin files back on. The drone just beeps, and gives the results above. It appears to see the .bin files, but just doesn't start the updating process.
lvl.3
