Hallo,
I'm Steve from Austria and i have a problem with my matrice 100.
It doesn't hold the position when it hovers.

my setup: Matrice 100 with TB48 battery on the downside and x3-camera
Weather: sunny, no wind (>1m/s)

When I start in P-Mode the Drone hover in 1 - 1,5m. It is allways drifting away, every site more than 1,5m  each site.
If I turn into the A-Mode, it doesn't hold the local position (no GPS), but it's hovering near perfectly!

There are 16 GPS satellits and i started on a airbase...


Sorry about my english, mybe could anybody help me.

Thy u
Steve

Hello! Steve,
Generally, we would not recommend flying our drone in a airbase.
Please take a look at some basic information in P51 of the User Manual: https://dl.djicdn.com/downloads/ ... _v1.6_en_160324.pdf

@DJI-Adela: The start and landing procedure in the airbase was legal and check with the tower in the location!!! - Can you help me with my problem? i installt the new Firmeware Version. When I hover in 1,5 m it's hard to hold the position (16Satellits GPS). when i move forwart, it is drifting away and you can't controll it. no reaction when i press the return to home button...