Does anyone have experiences good or bad with Android 6.0 devices? Dji's list of compatible devices is a joke.  I use a note 5 with lollipop and its flawless, it is not on their list.  I''m getting promps to update to 6.0 and am scared to do so.  My wifes S6 updated which I decided to try with my P3A, the camera view will not show but I can control the copter and camera. It works fine with my Note 5 still so I have to rule out a bad usb port and cord.  Did all usual trouble shooting ie; deleted app/reinstalled, unplugged micro usb end to the device while RC was on then plugged back in.  I can't get past the initial connection stage of the app "how to connect".  Wondering if anyone has any knowledge or insight specifically on the Android 6.0 update with the Dji go app.  

personally i'm using IOS, but i was told that DJI GO works with Android 6.0

DJI-Tim Posted at 2016-4-13 04:05
personally i'm using IOS, but i was told that DJI GO works with Android 6.0

Thank you.  I am curious however if 6.0's ability to work is dependent upon the specific device itself?

No issues with my Motorola Nexus 6 on android 6.0.1

DJI GO works fine on CM13 (Android 6.0.1) on my OPPO R7 Plus..

No issues with my Nexus 9 running Android 6.0.1.

I also fully with a Note 5. After updating to 6.0.1 I wasn't able to connect at all. I wiped phone and went bad j

GortToo Posted at 2016-4-20 08:21
I also fully with a Note 5. After updating to 6.0.1 I wasn't able to connect at all. I wiped phone a ...

Sony Z5 - 6.01 all good ..

My app worked just fine last fall,  but after upgrades to 6 on my shield tablet I can't get a video feed to save my life...  May or may not be 6.0 's fault though,  can't get anything in Apple devices either at this point.  

Works fine on Nexus 5 with 6.0.1

LG G3  6.01 all good

And fine on the Samsung S7...

I have Nexus 6p with 6.0.1 no problem

I have a Galaxy S6 Edge with android 6.0.1. No problems!

I have a Samsung GS7edge running android 6.0.1. I for the life of me could not get past the "How To Connect" screen. I noticed when I plugged the usb cable into my phone from the RC that the phone was "Connected for charging" in the pull down menu. If you tap that, and change it to "Transferring media files" mode, then it connected to the camera view almost instantly. This is on a P3A.
Android 6.0 must default (at least for certain phones) to a charge only mode, and therefore doesn't allow data to transfer through the cable. Without data you can't have a camera view. Give this a shot, hopefully it works for you!

Hello, I have an Osmo mobile 3 and a galaxy note 4 (6.0.1). At first, it worked fine but when I upgraded the app (gji mimo) it said that I needed 7.0 and it couldn't connect.