Hi!

I´ve just made a swap, my Ronin-M to a Ronin.

After packing it out and doing a perfect balance of the camera, BMPCC + Sigma 18-35, the app says that the camera is unbanalced and needs to be rebalanced.
Pan and tilt has low values but the roll is always the problem where I get high motor readings, causing the Ronin to shut down after a while.
If turn down the stiffness on the roll motor it starts acting weared.

The pan and tilt motor moves freely but I can feel and hear a slight resistence in the roll motor.
Which I thinks is the problem.

The Ronin is updated with the latest firmware.

Any idea what´s causing the problem?

Thanks!

/Martin

Hi,
Please read this instruction about how to balance the Ronin at http://wiki.dji.com/en/index.php/Ronin-Balancing
And, there are some tutorial videos for you in our official website: http://www.dji.com/product/ronin/info#video

Please try to balance the camera again!

The camera is perfectly balanced.
Camera balanced movie

But after auto calibration...
https://www.dropbox.com/s/5hpp1f2h6wkyhj4/IMG_5555.PNG?dl=0Pic of app

And the roll motor sounds like this, with a slight resistance...
Movie of roll motor making sound

SOLVED Roll motor broken...

martin@martinol Posted at 2016-4-15 02:14
SOLVED Roll motor broken...

Sorry about that!
Please contact your dealer for further help on repair issue or you may contact support.eu@dji.com.