Hello,
I have a S1000+ with: A2, LB1, Zenmuse Z15 Mark III HD, all works without problem, but the video transmition between the monitor lightbridge1 and gimbal, I get pixelated video.
For try, we put a LB2, and now the problem is that we don't get any video signal.
The Gimbal is new.
Lightbridge has the lastest firmware.

Any idea?


thanks

Sound like a bad cable from gimbal to camera. You can remove the bottom cover of the av/hdmi board and see if the cable is seated correctly.

Today me too update Lightbridge 2 has the lastest firmware, and change the new cable HDMI for Gimbal but  now the problem is that we don't get any video signal.
my Drone S1000 + A2+ Zenmuse Z15 Mark III HD.

annguyenanh Posted at 2016-4-28 08:25
Today me too update Lightbridge 2 has the lastest firmware, and change the new cable HDMI for Gimbal ...

Try adjusting your bandwidth slider and verify correct output is selected.

DJI-BladeStrike Posted at 2016-4-29 00:35
Try adjusting your bandwidth slider and verify correct output is selected.

Imtry everything setting but not yet



Please help me.

LB1: Manually select a channel that has less interference. And try to push away from the LB copter.