Hi guys, i'm still very much a beginner at this hobby but getting better however there is something i cannot work out.

When I go out to fly, I do the calibrate thing and a voice says something, repeating itself a couple of times. I cannot decipher what is being said. Is it important, is it an instruction or what? any ideas please.

Thank you

Probably "ATTI mode".  That seems to be the one everyone can not understand.  But whatever the message, it should be reflected on the screen or in the flightlogs.

Maybe "the home point has been updated"?

Probably " atti mode" or  " home point has been set"

Get some ear buds for your device, it'll make it clearer what's being said.  Quite often it's important enough not to want to miss it.

nigelw Posted at 2016-5-9 12:52
Get some ear buds for your device, it'll make it clearer what's being said.  Quite often it's import ...

Thanks Nigelw! That is a great idea.

Make us a short video or audio file, of the voice commands and post it... ;-)

RedHotPoker

She might be asking you out on a date, after all ...

That's what she said!

Hello Speedbird1, you can try to enter your flight record and play it back to see what happened at that time. It is in the paper plane icon on the left top.

Maybe she is saying " Don't touch me there ".

Kneepuck Posted at 2016-5-10 15:25
Maybe she is saying " Don't touch me there ".

Had to chime in and just LOL
NIce one knee pluck

Beto NYC Posted at 2016-5-9 16:52
Maybe "the home point has been updated"?

The home point has been updated....I understand that one.  Thank you

nigelw Posted at 2016-5-9 17:52
Get some ear buds for your device, it'll make it clearer what's being said.  Quite often it's import ...

Nice one Nigel, good idea

Kneepuck Posted at 2016-5-10 06:25
Maybe she is saying " Don't touch me there ".

Maybe my style for holding is indeed wrong LOL?

Kneepuck Posted at 2016-5-9 16:40
Probably "ATTI mode".  That seems to be the one everyone can not understand.  But whatever the messa ...

I think it is ATTI MODE but i can't find it reflected on the replay. It is just whilst i'm rotating the drone doing a calibrate. My replays only start from take off, am i doing something incorrectly or just looking in the correct place. I don't seem to haver any audio in any playback clips

You can download a RAR file of all the Voice Commands from this thread.  I'm just glad I haven't done anything to get the "OUT OF CONTROL"  voice!

I think mine said " Stop fondling those joysticks or I'm going home",  but I can't be sure.

Is there anyway to raise the volume up? Because sometime it talks in low tone sometimes it does loud.

Speedbird1 Posted at 2016-5-10 21:06
I think it is ATTI MODE but i can't find it reflected on the replay. It is just whilst i'm rotatin ...

It would have been ATTI mode then.  If you put your hand over the top of the aircraft or turn it on its side, it'll lose the GPS signal & switch from GPS to ATTI mode.

ssaqo@yahoo.com Posted at 2016-5-10 17:44
Is there anyway to raise the volume up? Because sometime it talks in low tone sometimes it does loud ...

Turn the volume up on your device.

FAS1 Posted at 2016-5-11 07:44
Turn the volume up on your device.

Were you able to write that with a straight face?

nigelw Posted at 2016-5-10 22:49
It would have been ATTI mode then.  If you put your hand over the top of the aircraft or turn it o ...

Nigel, that make perfect sense. Thank you!

It only makes the sound when i'm rotating it with my hold on the top or when facing the ground again with my hand in the same place.

Obviously no GPS which equates to ATTI Mode.

gil Posted at 2016-5-10 21:28
You can download a RAR file of all the Voice Commands from this thread.  I'm just glad I haven't don ...

Thanks for that, i'm off to find it.

Barney Rubbel Posted at 2016-5-10 19:57
Were you able to write that with a straight face?

Yes, but my eyes were rolling.

Reminds me of the blonde who went to the doctor.  " Doctor,  everywhere I touch,  it hurts.  Touch here or here or here,  it all hurts".  The doctor says,  " That's because your finger is broken ".

FAS1 Posted at 2016-5-11 07:44
Turn the volume up on your device.

hmm... You did and it worked? Genius!

FAS1 Posted at 2016-5-11 07:44
Turn the volume up on your device.

Don't put your phone on vibrate - doing so will shake your quad {:4_157:}