alan.zapata
lvl.1
United States
Offline
|
I would love to see a small box that plugs in between the X3/X5 and the handle that has an HDMI output, a control device plug and input for a manual gimbal control joystick. It would also be great if there was a built in wifi router which multiple users could log into to view or control the camera. A director and producers could watch and someone could control panning or focus while the operator controls the camera. If there was room you could also put a hardware H.264 encoder so you could stream directly to RTSP/RTMP.
If there was an new camera, either an X3/X5 with a real video output or a small interface that would plug in between the X3 and the handle where video could be extracted it would be fine. Apparently no current Apple device puts out real HD via HDMI (lightning cable info). Bolts and Tomahawks aren't very useful without a real HDMI output directly from the Osmo. If there was a real HDMI output it would be easy to use any streaming encoder and then a bonded transport or WiFi to send an RTSP/RTM stream.
|
|