microcyb
First Officer
Flight distance : 1095955 ft
United States
Offline
|
Well it has been reported that latest standard firmware can result in limited signal.
One thing to try is to downgrade your firmware and app.
User reinzneal Posted something cool since this happened after your firmware update. And again, just trying to offering any ideas to help out.
http://forum.dji.com/thread-52471-1-1.html
The Steps :
1. Download the firmware at http://phantomhelp.com/Mobile/Phantom-3-Standard/#FirmwareArchive and select the fw that you want .bin file format
2. Insert the file to sd card, outside folder, and must be the only one .bin file format
3. Turn on the RC and the drone without sd card until it connect (RC and Drone)
4. Connect to DJI GO App (to see downgrade status stay at front page of the app)
5. Insert the sd card. Then the downgrade process is starting and rear led will turn to yellow and there will be beep sound from the drone (it is normal). See at DJI GO app, there will be status bar show the downgrade process. If the rear led becomes green it means the process is complete, you also can see the succes notice at DJI GO App.
6. Restart the RC and Drone, connect DJI GO App, check the FW. Finish.
I hope it can help the issue of 1.6.80 firmware for Phantom 3 Standard
NOTE : DO IT WITH YOUR OWN RISK!
This one has seemed to help people.
http://dl.djicdn.com/downloads/p ... _FW_V01.05.0070.bin |
|