Please select Into the mobile phone version | Continue to access the computer ver.
1.09 Firmware Gimbal problems
863 2 2016-6-19
Uploading and Loding Picture ...(0/1)
o(^-^)o
sundayvaldez
lvl.1

United States
Offline

I updated my I1 to newest firmware and My status LED on the camera went to a dim green and now the camera will not rotate and flashes red after a while.

2016-6-19
Use props
airymok
lvl.4
Flight distance : 2623652 ft
Hong Kong
Offline

Remove the firmware bin file from your SD card, then this "issue" will go.
2016-6-19
Use props
sundayvaldez
lvl.1

United States
Offline

airymok Posted at 2016-6-19 21:16
Remove the firmware bin file from your SD card, then this "issue" will go.

I removed the bin and red light went away and everything looks ready The DJI go app shows everything is good . accept my status light on the camera does not turn on green, when i take a picture it will flash green then when I record the light blinks red, but before the update it would stay on green now its a real dim green light.  after the update it was green for a few minutes then it turned off and never came on again.
2016-6-19
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules