Hello,

When i turn on Ronin-M, gimbal LED indicator starts blinking red and that's ok. According user manual, when the remote controller is turned on, LED indicator should always be green, but when i turn on the remote controller, the LED indicator starts blinking green - red - green - red - ...  I think it causes lag between gimbal and the remote conroller, cause the gimbal moves according to the remote controller only when the green light appears. When red light appears the gimbal seems not be getting any signals from remote controller eventhough the button is pressed. I tried binding remote controller with gimbal once more, but it doesn't help. Could you help me to fix this problem, please?

I found the solution - remote controller wasn't updated to the latest version.

lukasduncius@gm Posted at 2016-7-18 22:04
I found the solution - remote controller wasn't updated to the latest version.

Have you tried updating the RC via the Ronin Assistant Software? The mismatched firmware is the likely cause for this issue.

DJI-Jamie Posted at 2016-7-18 08:10
Have you tried updating the RC via the Ronin Assistant Software? The mismatched firmware is the likely cause for this issue.

I have same problem. All firmware a update... Pls, help!

fansec9b4b46 Posted at 2017-1-29 01:19
I have same problem. All firmware a update... Pls, help!

Are you using a Ronin M also, or is it a different model?

Here the steps:

1 connect your ronin m transmitter to your pc via usb and fire it up.

2 after Windows ricognized the transmitter, open the latest dji assistant, in this case the 2.5.

3 login with your email and password and go to the update menu.

4 inside the specific upgrade firmware menu tipe with your keyboard "door".

5 a new pop up will appear and you have to type into user and password the word "ronin"

6 this allow to force dji assistant to unlock the latest transmitter version to 1.1.0.21 !!

7 follow the intruction and that's it! Don't be afraid if the update fail first time. This procedure first erase the transmitter firmware. redo the same procedure and dji assistant will install the latest firmware 1.1.0.21 Do the calibration and ronin will works PERFECT!!!