If you don't know how already, here's how to upgrade the firmware on your Matrice 600 and Zenmuse X5.
If you have any issues, feel free to let us know!

zenmuse not get update x5 in my matrice 600  HELP!!!

mgv1vl13SFxq Posted at 2016-9-28 02:49
zenmuse not get update x5 in my matrice 600  HELP!!!

To clarify, do you only have a M600, or do you use the X5 on other crafts or an OSMO as well? Is the update failing or not attempting to update at all? Can you elaborate as to how far into the process you get to before you run into issues?

I too am not coming right with the update for the X5 on the M600. I immediately get a solid red light and constant noise. I have tried various computers and memory cards but all I get is multiple messages like the ones below. I have followed all instructions on the video but still no luck.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: MATRICE600_FC550_FW_V01.09.01.10.bin
Result: Corrupted.
Firmware bin file is corrupted, download it again from the DJI offical website.

========== 2016.08.15 12:29:52 =====================
Packet: MATRICE600_FC550_FW_V01.09.01.10.bin
Result: Corrupted.
Firmware bin file is corrupted, download it again from the DJI offical website.

Same thing...
========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: MATRICE600_FC550_FW_V01.09.01.10.bin
Result: Corrupted.
Firmware bin file is corrupted, download it again from the DJI offical website.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: MATRICE600_FC550_FW_V01.09.01.10.bin
Result: Corrupted.
Firmware bin file is corrupted, download it again from the DJI offical website.

Matric 600, ZenMuse X5

leadingedge Posted at 2016-10-6 16:11
I too am not coming right with the update for the X5 on the M600. I immediately get a solid red ligh ...

Sorry for the late reply.Could you please try to unplug the CAN cable and update it again?

JkZkWBDPH0uH Posted at 2016-10-21 21:38
Same thing...
========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: MATRICE600_FC550_FW_V ...

Please try to unplug the CAN cable and update it again.

So are you now able to update the X5 firmware through the M600? I thought this was not possible, as it required the OSMO or an Inspire?

DJI Mindy Posted at 2016-10-23 10:03
Please try to unplug the CAN cable and update it again.

I have tried disconnecting the can cable and still get the same error.

leadingedge Posted at 2016-11-4 18:13
I have tried disconnecting the can cable and still get the same error.

If the error persists, I'd suggest you to get in touch with our tech support at support@dji.com.
They will help you out.

Hello.... new with X5 and trying to Update

DJI Mindy Posted at 2016-11-4 03:11
If the error persists, I'd suggest you to get in touch with our tech support at .
They will help you out.

Spend 4 hours now, several different computers, 3 different SD cards, 10 different youtube videos, but still No new Update for the X5.