Hello guys,

I don't like both FT and M/S look difficult for me, I am use to Meters and Mph clear know number for easy. Need Update for Dji Go setting any change FT,Meters,M/s and Mph Please!
Why you know use drive traffic icon is mph always in UK, No KM!



Thanks,

Jatinder

"Why you know use drive traffic icon is mph always in UK, No KM!"

Perhaps in the UK & USA but just about everywhere else it's km/h
It doesn't take long to learn to use m/sec.
You just need to know that your Phantom's top speed is 16 m/s in still air.

labroides@yahoo Posted at 2016-10-8 02:21
"Why you know use drive traffic icon is mph always in UK, No KM!"

Perhaps in the UK & USA but just  ...

I need to Mph my work flight.

Gh0stxSinghx Posted at 2016-10-8 12:27
I need to Mph my work flight.

So ...if you need mph, go into the app settings, find the Units of Measurement setting and change it from metric to imperial.
Problem solved.

Yes, Metric = Meters and M/S, Imperial = Feet and Mph.. I use Meters and MPH only but cannot change any setting.

I don't know which aircraft you have, for the Phantom 3 Pro:

Max Speed        16 m/s (ATTI mode, no wind) = 35.79 Mph
Max Ascent Speed        5 m/s =11.18 Mph            
Max Descent Speed        3 m/s =  6.71 Mph

You can ballpark guesstimate any speed, just know it'll always be lower than these values, there are many online conversion tools available..
It might be nice to have the GO app just express the speed in Mph, but why do you REALLY need to have that DURING flight?
Shouldn't you be concentrating on avoiding trees?

EDIT: CUBITS RULE!

You're not gonna get anywhere with this

It's been tried before

http://forum.dji.com/thread-58664-1-1.html  (see my posts #12, 24, 31 - I agree with you)
It would seem that the UK is metric so we are being told

labroides@yahoo Posted at 2016-10-8 09:40
So ...if you need mph, go into the app settings, find the Units of Measurement setting and change  ...

Is this not the case? Seems like it would be a standard app feature for everyone (user settable units).

Gh0stxSinghx Posted at 2016-10-8 12:49
Yes, Metric = Meters and M/S, Imperial = Feet and Mph.. I use Meters and MPH only but cannot change ...

Just print this out and carry it with you:

I'll just leave this one

Mariuss Posted at 2016-10-8 22:30
https://youtu.be/pikrntjcbyw I'll just leave this one

Yep metric is a LOT easier

... but I walked 3 miles today

... just sayin'

jamesazen Posted at 2016-10-8 12:02
I don't know which aircraft you have, for the Phantom 3 Pro:

Max Speed        16 m/s (ATTI mode, no ...

Well, I use meters and mph my brian know number, just like drive and electric bike on display show speed mph is better.

endotherm Posted at 2016-10-8 20:57
Just print this out and carry it with you:

No need m/s off, change to mph is pretty!

knobbydave@hotm Posted at 2016-10-9 00:10
Yep metric is a LOT easier

... but I walked 3 miles today

www.google.com-> 3 miles to km= 4.8km. Everytime...

it should be in knots too.  sheesh, the simple things are sooooo difficult for dji

just my app Updated the Untis. "Metric(km)" but why not Mph?

I would need Updated the Metric(mph) for all dji pilots (P3, Mavic, P4P and etc)

Metric system is the international unit system... So... You have to do with that !