Please select Into the mobile phone version | Continue to access the computer ver.
Build for racing drone
Uploading and Loding Picture ...(0/1)
o(^-^)o
alereds.mn
lvl.1
Offline

Hi guys, i'm Alex and i'm new in the DJI World.
I need your help to find out a build for a racing drone.
I've seen the new snail racing propulsion system (with 2305 motors) and i would like to use this, but i don't know which frame i have to pick (that also matches the holes for the motor's screws).
Thanks for the support!

2016-10-13
Use props
DJI-Jamie
DJI Team
Flight distance : 112405 ft
United States
Offline

It's made for small aircrafts, which can be said for most DIY racing drone frames. They're normally under 300 mm in size. You would want something that can fit a 23×5mm stator size motor.
2016-10-13
Use props
Alereds
lvl.1
Italy
Offline

DJI-Jamie Posted at 2016-10-14 02:58
It's made for small aircrafts, which can be said for most DIY racing drone frames. They're normally  ...

Ok thanks. Can you post me a link for an example of the frame you intend?
For the rest of the build, for example the flight controller, can i use the apm/pixhawk/naza as the bigger frames ?
2016-10-13
Use props
fans603ae64c
lvl.1
Japan
Offline

Hi Alex,
If you want to build quadcopter for racing,then you need to select a very fast turning motor with small propellers. you have seen the motor 2305 i think it's more bigger. I suggest the motor rang from 1306 to 2208, mathing frame rang from 150mm to 250mm.
2016-11-6
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules