Please select Into the mobile phone version | Continue to access the computer ver.
Battery Connection Broken
1268 15 2016-10-15
Uploading and Loding Picture ...(0/1)
o(^-^)o
dheeraj.carver
lvl.1
Flight distance : 50587 ft
United Kingdom
Offline

This is new for me. As a regular maintenence I am ensuring to use my batteries twice in a week for ateast 10 min. Today it shows me error i have attached and my inspire is not starting the motors. Any expert advice please?

Wondering if this happen in mid flight?
20161015_105422.jpg
Screenshot_2016-10-15-10-53-36.png
Screenshot_2016-10-15-10-53-56.png
Screenshot_2016-10-15-10-53-32.png
2016-10-15
Use props
dheeraj.carver
lvl.1
Flight distance : 50587 ft
United Kingdom
Offline

Well This is what it is showing now. I am so afraid as this is the New Kit used only thrice and now this error

I am in UK for only few more days and want to be ensure to get this fix before end of this month. what should I do?
Screenshot_2016-10-15-11-10-53.png
2016-10-15
Use props
Donnie
Captain
Flight distance : 3636782 ft
United States
Offline

dheeraj.carver@ Posted at 2016-10-15 05:15
Well This is what it is showing now. I am so afraid as this is the New Kit used only thrice and now  ...

Ok this "main board failure " can be cured with a IMU and a Gimbal calibration , that I am sure of.  As far as the Battery being "Broken" warning I have not had happen to me .  I would  cycle the battery and  do a fulll charge and the next flight I would keep it real close to home and see what it does.  
***** be sure when using the flight battereis, alwys try to bring them to less than 10% or less and then at least once a month below 5%.

donnie
2016-10-15
Use props
dheeraj.carver
lvl.1
Flight distance : 50587 ft
United Kingdom
Offline

Sorry Donnie, I am not sure what I have to do now. I am more afraid because I am flying back to India on 30th Oct as my VISA is getting expire and wondering if this is not fixed then it will be no use for me.

I cannot buy battery in India as they charge much more rather than paying while I am in UK. If this is needs to be replace from DJI I would like to make sure this will be before 30th Oct.
2016-10-15
Use props
dheeraj.carver
lvl.1
Flight distance : 50587 ft
United Kingdom
Offline

I am done with all stuff of IMU calibration and Gimbel too. All this working fine with the another battery I purchased recently however things are not working AT ALL with the battery came with the Inspire 1 itself. Feel like Crying when my days are near to leave. I am feeling like I am wasted my time and money buying this Inspire really {:4_142:}

The battery which is not working is with Serial number 7421152405122 TB47.
2016-10-15
Use props
Henry Mo-Yung
First Officer
Flight distance : 11548839 ft
  • >>>
Hong Kong
Offline

dheeraj.carver@ Posted at 2016-10-15 19:53
I am done with all stuff of IMU calibration and Gimbel too. All this working fine with the another b ...

Try to clean the 2 gold contact points of the TB47 battery with a soft rubber to see if it was just a bad contact of that battery and the 4 pins in your Inspire 1 that caused the "battery connection to the centre board failed" message.

Henry
2016-10-15
Use props
dheeraj.carver
lvl.1
Flight distance : 50587 ft
United Kingdom
Offline

Man, you MADE MY DAY. Thank you SO much indeed. Life is normal to back now.

I was reading some blogs and they suggest try to update the firmware again and battery will be fine. I tried that as I had updated the V01.09.01 I tried the same file again and it was like ditttttttttt continuous beep.

After your post I tried cleaning the battery points and all good however my App now not showing the version of AC nor for RC. Image below. Logs on SD card is

========== 2014.01.01 00:00:05 remo-con disconnect======
Packet: WM610_FW_V01.09.01.30.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.09.01.30.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the device.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.09.01.30.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.




Screenshot_2016-10-15-11-33-19.png
2016-10-15
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

dheeraj.carver@ Posted at 2016-10-15 21:28
Man, you MADE MY DAY. Thank you SO much indeed. Life is normal to back now.

I was reading some blog ...

Have you already tried reinstalling the Go app?
2016-10-15
Use props
dheeraj.carver
lvl.1
Flight distance : 50587 ft
United Kingdom
Offline

Nope. I have not played with my iPad for Go APP. you think its a app issue?

I will definitely try that too and keep you posted.
2016-10-16
Use props
dheeraj.carver
lvl.1
Flight distance : 50587 ft
United Kingdom
Offline

No Luck. I did tried installing the complete app from scratch but still it not showing the RC and AC firmware version. I am afraid if this will gonna affect my flying?

I tried to downgrade the AC firmware thinking re-updating will solve this but app says now firmware available to downgrade for my AC.

Any idea ?
2016-10-20
Use props
dheeraj.carver
lvl.1
Flight distance : 50587 ft
United Kingdom
Offline

Please let me know if you think re-installing firmware will help. Overall I am only concern if it fly well and not bothered for version and stuff.
2016-10-21
Use props
Donnie
Captain
Flight distance : 3636782 ft
United States
Offline

dheeraj.carver@ Posted at 2016-10-21 07:15
Please let me know if you think re-installing firmware will help. Overall I am only concern if it fl ...

Ok , I dont get it what is the SPECIFIC  problem ?   are you talking about the  Main  Board , the battery or what ?   are you talking about the version N/A ?  for RC, Ac camera Etc.  If so it will ONLY come on when you are in FULL standby mode ,  everything IS ON  or it wont show up .  Is this the problem ?  Make sure you have the cable of good quality from the RC to the Go AP as well.


donnie

2016-10-21
Use props
dheeraj.carver
lvl.1
Flight distance : 50587 ft
United Kingdom
Offline

The only problem is left is about the Version N/A and everything else is working fine. I have tested all the functions on ground without prop installed and seems fine, However afraid if something goes wrong in air.
2016-10-22
Use props
Donnie
Captain
Flight distance : 3636782 ft
United States
Offline

dheeraj.carver@ Posted at 2016-10-22 06:21
The only problem is left is about the Version N/A and everything else is working fine. I have tested ...

Did you turn the entire system on and make sure you have a good cable between RC And Go App. The versions will be there.  You are fine, E mail me from India if you have troubles.

Donaldjames1990@gmail.com

Donnie
2016-10-22
Use props
dheeraj.carver
lvl.1
Flight distance : 50587 ft
United Kingdom
Offline

Sure mate. Thanks a lot for this. I have tested the differet cables but no joy. Seems like I used tge sd card by mistake with the firmware on it and while it was making the noise i turned off the AC and from then this is happened.
2016-10-23
Use props
Donnie
Captain
Flight distance : 3636782 ft
United States
Offline

dheeraj.carver@ Posted at 2016-10-23 05:30
Sure mate. Thanks a lot for this. I have tested the differet cables but no joy. Seems like I used tg ...

Did you re install the go app ?   This is very strange , with the entire system powered on ,the only  version that registers is the go app version?  

You have total control of the aircraft and the go app  functions normally other than the N/ A. For the RC - AC  Camera - versions  ?  Are you using an approved go app device ?  IF so is it android or apple system ?

Donnie
2016-10-23
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules