Date : 2017.04.05
Firmware : v01.03.0550
DJI GO 4 App iOS : v4.0.6
DJI GO 4 App Android : v4.0.5
What’s New?
1. Optimized the RTH function.
2. Improved hovering performance.
Notes:
1. Restart the aircraft and remote controller after upgrade is complete.
2. If the firmware upgrade fails, restart aircraft, remote controller and DJI GO 4, and retry.
Mavic Pro Release Notes
Date : 2017.03.02
Firmware : v01.03.0500
DJI GO 4 App iOS : v4.0.5
DJI GO 4 App Android : v4.0.4
What’s New?
1. Updated No-Fly Zone management.
2. Optimized gimbal calibration.
Notes:
1. Restart the aircraft and remote controller after upgrade is complete.
2. If the firmware upgrade fails, restart aircraft, remote controller and DJI GO 4, and retry.
Mavic Pro Release Notes
Date : 02/14/2017
Firmware : v01.03.0400
DJI GO 4 App iOS : v4.0.4
DJI GO 4 App Android : v4.0.2
What’s New?
1. Added a self-diagnostic test function for ultrasonic sensors every time the aircraft is powered on.
2. Improved the Interval Mode performance.
3. Upgraded the D-Log color mode to extend dynamic range.
4. Optimized the video transmission by reducing the transmission signal loss ratio.
Notes:
1. Restart the aircraft and remote controller after upgrade is complete.
2. If the firmware upgrade fails, restart aircraft, remote controller and DJI GO 4, and retry.
Mavic Pro Release Notes
Date : 12/26/2016
Firmware : v01.03.0200
DJI GO 4 App iOS : v4.0.2
DJI GO 4 App Android : v4.0.1
What’s New?
1. Improved gimbal performance when flying in low temperatures.
2. Added Cinematic Mode for smoother the footage.
Notes:
1. Restart the aircraft and remote controller after upgrade is complete.
2. If the firmware upgrade fails, restart aircraft, remote controller and DJI GO 4, and retry.
Mavic Pro Release Notes
Date : 12/06/2016
Firmware : v01.03.0000
DJI GO 4 App iOS : v4.0.0
DJI GO 4 App Android : v4.0.0
What's New?
1. Added AR route display in TapFly mode when used with the DJI GO 4 app.
2. Added a vibration warning for the remote controller when the aircraft enters ATTI mode.
3. Added wind speed evaluation and a high wind speed warning.
4. Added more film looks and color modes (when used with the DJI GO 4 app).
Improvements:
1. Optimized the compass algorithm to reduce switching from GPS Mode to ATTI Mode.
2. Improved magnetic detection for the remote controller. The aircraft will now return to home when strong magnetic interference is detected.
3. Improved the speed at which the HD video link connection can be regained after disruption.
4. Optimized altitude maintenance capabilities when flying over water.
5. Optimized Gesture Mode.
6. Improved the indoor flying experience by shortening the minimum distance from an obstacle from 3m to 1m.
7. Optimized power management for long-term battery storage.
Notes:
1. Restart the aircraft and remote controller after upgrade is complete.
2. If the firmware upgrade fails, restart aircraft, remote controller and DJI GO 4, and retry.
Mavic Pro Release Notes
Date : 11/09/ 2016
Firmware : v01.02.0900
DJI GO App iOS : v3.0.2
DJI GO App Android : v3.0.1
What's New?
Optimized Remote Controller Calibration
Adjusted default gimbal pitch smoothing value from 10 to 15 for smoother movement.
Increased USB connection stability.
Adjusted camera color.
Fixed occasional remote control command timeout.
Fixed occasional unresponsiveness to remote controller commands.
Deleted support for using C1 or C2 button to launch the DJI GO app on iOS.
Notes:
Restart the aircraft and remote controller after upgrade is complete.
If the firmware upgrade fails, restart aircraft, remote controller and DJI GO, and retry.
Mavic Pro Release Notes
Date : 10/23/2016
Firmware : v01.02.0810
DJI GO App iOS : v3.0.1
DJI GO App Android : v3.0.0
What’s New?
Optimized the Return-to-Home and Landing (refer to the user manual for details).
Reduced descent issue caused from flying indoors to outdoors.
Minimized an overheating issue resulting from not removing the gimbal clamp after powering on the aircraft.
Improved the stability of the aircraft when switching between Portrait and Landscape.
Optimized the ActiveTrack experience, keeping moving subjects in center frame more effectively and smoothing footage.
Optimized control parameters to improve the flight experience.
Fixed occasional issue of GPS signal loss.
To solve the misdescription of the error message which caused by misconfiguration of the parameter list.
Notes:
Restart the aircraft and remote controller after upgrade is complete.
If the firmware upgrade fails, restart aircraft, remote controller and DJI GO, and retry.
You legends!!! Open the doors and let it fly to our mail boxes!!!! Never ever thought of cancelling and I can't wait for it to make me want to go on more adventures just so I can uz it!! :-)
OK, I see. That's because Mavic suddenly lost the VPS track, so it's trying to lower and "see" the ground better to regain the VPS. We changed that with the new firmware
Hope this update is not just smoke. I'll start believing once I see others start talking about getting notification. I'm in the first day of pre-orders myself. Will be interesting to see when my status changes.
Where did this update come from? I don't have it on my order status page...
Edit : Got it. Wonder why it hasn't been sent to everyone. Also they haven't updated the old status page information about having issues.
Some people already have a tracking number now. You most likely need to be the one who placed the order within the first few hours of announcement to get this batch though.
Thanks for the release notes, hope to see an downloadable manual really soon so I can start reading. Also thanks to you and your colleagues for the hard work and fixing issues.
I ordered a couple hours after launch and I didn't make the cut, well at least a few people will have them, maybe someone with a little intelligence will do a video review cause I'm sick of watching Casey.
You probably don't know, and if you don't I totally understand. Are they shipping allotments to dealers yet, or only direct preorders? I ask because I ordered through Amazon/Drone World.
Sound odd.. you are in Switzerland and you ordered the 28th.. and you got it shipped? While people that placed the order the 27th didn't got anything? Hmmmm... it could be because you ordered the plain mav and not the combo.
I'm not sure.. but you are in Switzerland you and you ordered it the next day and you got it shipped.. while I ordered it the 27th (19:56) and I live in Italy and got nothing... so there's clearly something "wrong" in the "first come first served" rule.