Please select Into the mobile phone version | Continue to access the computer ver.
IOC problems
1360 8 2015-2-3
Uploading and Loding Picture ...(0/1)
o(^-^)o
paul2201
New

United Kingdom
Offline

Hello,
I am pulling my hair out in frustration
I love the phantom in the way it handles.... however I have a problem in activating the IOC function. Iv'e watched dozens off tutorials on Youtube, read the manuals, front to back and back to front, many time now.
Small box is ticked in the IOC setting on NAZA-M software, Everything is showing as on. Calibration completed, green light to go.
When I fly MC will not go into CL or CL mode, not tried the failsafe mode yet.
Any input will be greatly received.

Regards
Paul   


2015-2-3
Use props
markus2015
Second Officer

Germany
Offline

Hi Paul,

If you connect your controller/phantom to the assistant software and callibrate it, does the toggling of the S2 switch work (does it also change positions Off/Course lock/home lock on your screen)?

:edit:
You should also check if the S1 switch works (failsafe or ATTI).
2015-2-3
Use props
paul2201
New

United Kingdom
Offline

Thanks for reply.
yes, when I toggle S2 switch on controller the U slider moves accordingly.
I have also set S1 the second ATTI as failsafe.
All seems to be set, just not working during flight.

Regards      
2015-2-3
Use props
gil
Captain
Flight distance : 1379308 ft
United States
Offline

Do you have 6 or more satellites?
Before you flip the switch S2 to Home Lock are you well OUTSIDE of the 10m range around home point?
2015-2-4
Use props
hamgoulding.gma
lvl.1

Ireland
Offline

I have selected Naza-M at the top right of Vision 2 + assistant. But underneath that it shows IOC OFF. The reason I want to use Naza-m is to get access to Course Lock and Home Lock but with IOC showing OFF it is efectively still stuck in Phantom mode even though the software says otherwise.

It is responsive to S1 and S2 switch movement as shown on the U and X2 scales under Channel Monitor, but in flight it is not responding to S2 commands to enter SL or HL.

Any ideas please???
2015-2-5
Use props
jamesnns.email
lvl.4

United States
Offline

I have selected Naza-M at the top right of Vision 2 + assistant.

Theres your problem
2015-2-5
Use props
jamesnns.email
lvl.4

United States
Offline

You're using the wrong program.
2015-2-5
Use props
jamesnns.email
lvl.4

United States
Offline

This section is for P1s and FC40s
2015-2-5
Use props
jamesnns.email
lvl.4

United States
Offline

Try downloading the correct program from DJI ...IF you have the P1 or FC40.
2015-2-5
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules