Issue in software ?

Below is a pic of Vision Assistant 3.6 with a triangle in the bottom right corner with an exclamation mark in it, and it is flashing from yellow to red repeatedly.

the icon says to click on it for more details, but no details pop up...............

DJI have any answers for this?

As you apparently have a Vision + based on the Zen IMU version, why does Assistant show it as a "Phantom 2" at the top of the screen, and not "Phantom 2 Vision +"?

As well, your receiver is not showing up on that screen.  That may be the problem.

I re-connected and it does say Phantom 2 Vision +, but controller is still not being seen.

When i plug the controller in via USB to the computer and use RC System Assistant, controller seems OK.

I believe I have messed up the MC as discussed in another post, which is why the controller is not being seen. ??




Have a new MC on the way and will know soon enough.

richard.parsons Posted at 2015-2-7 00:54
I re-connected and it does say Phantom 2 Vision +, but controller is still not being seen.

When i p ...

Do you know what it means? I have the same problem. The motors are not starting as well