Are there any pointers on centering the camera? It seems to favor leaning left from the cameras point of view. Can't seem to find any way to remedy this in the settings and calibrating the gimbal hasn't improved anything. Any pointers or suggestions would be greatly appreciated thank you

i have the same issue so looking forward to anyones thoughts

fans3b7b2013 Posted at 2016-11-16 05:51
i have the same issue so looking forward to anyones thoughts

So this is what I did and it seems to have straightened the camera out.

Yup, do a cold IMU calibration, then do the routine gimbal calibration right afterwards.
Chill the drone down good, just before you begin...


RedHotPoker

Hi, I've replied you in the other thread.
Please let us know if this helps.

DJI Mindy Posted at 2016-11-16 11:41
Hi, I've replied you in the other thread.
Please let us know if this helps.

Yes all seems to be right now! Thanks for your response!

Kvngoodman Posted at 2016-11-17 01:36
Yes all seems to be right now! Thanks for your response!

You are welcome. Glad to hear that.

DJI Mindy Posted at 2016-11-16 22:15
You are welcome. Glad to hear that.

Will this also work on my P3S?

youtube.com/watch?v=RWqYvXDi3bA

fans51ffc175 Posted at 2017-12-5 14:16
Will this also work on my P3S?

youtube.com/watch?v=RWqYvXDi3bA

Sir, Calibrate IMU and gimbal. Do you have any crashes or hard landings?

Vendex Posted at 2017-12-5 15:58
Sir, Calibrate IMU and gimbal. Do you have any crashes or hard landings?

I have done both several times. See link below for my problem.



There is a "Recenter Gimbal" function on my DJI Go App, but all it does is point the camera straight down. Do you know how that function works?

On some Phantoms you can adjust roll and yaw motor position manually

My P3P camera was off center. Fix was simple, tightened the azimuth set screw.