Please select Into the mobile phone version | Continue to access the computer ver.
S1000+ + A2 (with Futaba) + LB?
1199 2 2015-2-10
Uploading and Loding Picture ...(0/1)
o(^-^)o
timotorvikoski.
lvl.1

Finland
Offline

Hi,

I just wanted to check once more because I couldn't find a decent reply for my question from anywhere?
When using A2 with Futaba it's working at 2,4GHz. When adding LB to the setup the videolink is also working at 2,4GHz.
Will that cause interference? Is there a possibility to loose the control of the aircraft?

Is this recommended by DJI or do you recommend using 5,8GHz Videolink instead?

DJI Wiki says it's ok to use LB + A2 and the manual says it's not recommended.
Which one is the correct way to go?
2015-2-10
Use props
ducpeter
Captain
Flight distance : 62175 ft
  • >>>
Germany
Offline

Hi
so your LB connect to A2 in X2 -> your transmitter (Futaba) is connected to the groundend LB only the LB send out in 2,4 not your Futaba
2015-2-10
Use props
timotorvikoski.
lvl.1

Finland
Offline

ducpeter Posted at 2015-2-10 22:34
Hi
so your LB connect to A2 in X2 -> your transmitter (Futaba) is connected to the groundend LB only ...

oh.. ok. Then I start installing the gimbal today.
Thanks!
2015-2-10
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules