Please select Into the mobile phone version | Continue to access the computer ver.
Inspire 1 V2 altitude variance and error
514 1 2016-12-11
Uploading and Loding Picture ...(0/1)
Alex G
Flight distance : 55984 ft
  • >>>

I have observed in my Inspire 1 V2 model T601 altitude variations in hovering mode. The aircraft was positioned at an altitude of about 5 meters when I was doing battery discharge. After about 10 minutes the aircraft began to climb slowly about 4 meters and stopped ascending. In this moment, The DJI GO app did not indicate this increase in height, the aircraft had a real altitude of 9 meters, but the app indicates 5 meters. In this moment, I drag the stick to position it about 2.5 meters above the ground, but the app indicated -5 meters of altitude and 2.5 meters in the VPS altitude. I have the latest firmware installed. On another occasion, this happened to me but on the contrary, the aircraft began to descend to 2 meters and the altitude indicated in the app was 18 meters.
It has happened to someone this error?

Best regards

Use props
DJI team
Flight distance : 112405 ft
United States

Have you tried calibrating the IMU or cleaning the VPS sensors?
Use props
You need to log in before you can reply Login | Register now

Credit Rules