So, All my firmware is %100 updated app too.
3 Red lights Blinks just like the manual says so but I dont know how to fix the problem. Help please :-0 ;-)
      

hi phantomfoot, what exactly is the problem?
Rod

rod Posted at 2015-2-13 11:43
hi phantomfoot, what exactly is the problem?
Rod

Well 3 red lights blink on rear end of my Pv2+ Manual says ''Not Stationary or Sensor Bias is too Big'' not sure what that means... But everything works right. I have done Compass calibrations but it still goes on       ;-/  

PhantomFoot Posted at 2015-2-13 11:47
Well 3 red lights blink on rear end of my Pv2+ Manual says ''Not Stationary or Sensor Bias is too  ...

Ah! brace yourself for the technical feedback shortly coming your way from some really technical guys here- I've not come across this issue.
Best of luck.
Rod

rod Posted at 2015-2-13 11:51
Ah! brace yourself for the technical feedback shortly coming your way from some really technical g ...

Okay! Rod

PhantomFoot Posted at 2015-2-13 11:54
Okay! Rod

I'll take a shot here,  what numbers are you getting on your IMU calibration?

Gerry1124 Posted at 2015-2-13 11:56
I'll take a shot here,  what numbers are you getting on your IMU calibration?

Heres The stats

PhantomFoot Posted at 2015-2-13 12:05
Heres The stats

Gyroscope is within limits at 0.8, but just barely.  Should be close to 0.0  Have you done advanced calibration, then basic calibration after that?

Gerry1124 Posted at 2015-2-13 12:09
Gyroscope is within limits at 0.8, but just barely.  Should be close to 0.0  Have you done advance ...

I just tried to do a a advanced one then it said MC was too hot? its sitting on my my desk. does not feel warm idk let me try again

PhantomFoot Posted at 2015-2-13 12:13
I just tried to do a a advanced one then it said MC was too hot? its sitting on my my desk. does n ...

okay just finished basic and adv calis looks good now no Red lights let me reboot and double check

Just say ok to that hot message.  It always pops up.  This is mine.  Make sure it is on something level, don't move it when it's calibrating and not sitting on metal or close to magnets.

Gerry1124 Posted at 2015-2-13 12:09
Gyroscope is within limits at 0.8, but just barely.  Should be close to 0.0  Have you done advance ...

nah its still occasionally going into the red light blinks ;-o

PhantomFoot Posted at 2015-2-13 12:19
nah its still occasionally going into the red light blinks ;-o

Did you do advanced IMU calibration already?

Axeman Posted at 2015-2-13 12:30
Gerry on that screenshot what is reset btu info?

I've never had to touch that, so I don't know what it would do.

Axeman Posted at 2015-2-13 12:30
Gerry on that screenshot what is reset btu info?

Here is a page of info I found on the BTU

http://www.djiguys.com/Forum/viewtopic.php?t=4197&p=21610

new problem its now just flashing R G Y constantly

PhantomFoot Posted at 2015-2-13 12:49
new problem its now just flashing R G Y constantly

Now that is a power on self test.  what did your imu numbers result in?

After the system start and self-checking has finished, if the LED blinks Red, Green and Yellow continually.
Sensor error is too big. Please connect the assistant software, enter the "Tools" - > IMU calibration, watch the "IMU calibration" videos, carry out basic calibration or advanced calibration.
Damage of the accelerometer. Please contact your dealer.
Sensor does not work. Please contact your dealer.

http://wiki.dji.com/en/index.php ... Yellow_continually.

ok I redid all IMU went out side did so compass calibrations and after thinking I'm not near anything that would mess up a test.. or I am oh! wait I have a  metal LEG! DUH! ya IMU looks good no more Red lights and I'm flying again safely !!  Thanks Gerry... again!

PhantomFoot Posted at 2015-2-13 13:04
ok I redid all IMU went out side did so compass calibrations and after thinking I'm not near anythin ...

Good to hear that
Happy Flying!

Gerry1124 Posted at 2015-2-13 13:06
Good to hear that
Happy Flying!

hey I'm having trouble  you can watch the video in 45 mins sorry Vimeo is kinda Lame

PhantomFoot Posted at 2015-2-17 05:23
hey I'm having trouble  you can watch the video in 45 mins sorry Vimeo is kinda Lame https://vimeo. ...

I watched the video, what's the problem?

Gerry1124 Posted at 2015-2-17 07:37
I watched the video, what's the problem?

Its Flashing red alnog with the Green... I mean  I dont think anything is wrong but it worrys me that there a red light.

PhantomFoot Posted at 2015-2-17 07:39
Its Flashing red alnog with the Green... I mean  I dont think anything is wrong but it worrys me th ...

I see green and yellow at the end.

PhantomFoot Posted at 2015-2-17 07:39
Its Flashing red alnog with the Green... I mean  I dont think anything is wrong but it worrys me th ...

Most lights have different meanings as they go through the startup sequence.