With all the talk about batteries recently I decided to check over mine and found something I didn't understand.

If I open up the Pilot app and check out my battery stats
My TB48s are showing 22 Volts with the expected 5700 MaH
but....

One of my TB47's is showing 26 Volts with a degradation down to 4255 Mah (I realize the mah rating always goes down when you recharge a battery a number of times).

Should I be concerned about the difference in Volts?  
Anyone notice this with their batteries?

What voltage are you seeing in the app on any battery?

Can anyone just turn their inspire 1 on, open up the pilot app, click the battery icon and tell me what number for Volt comes up? Please? anyone?

25.76 on the standard battery. I hope this helps.
BTW  3 of my cells show 4.30V, the other 3 show 4.28V.. what about yours?

25.9V  4244 mAh from the TB47 100%
13 min 38 flight just hovering in GPS set down at 21.4V loaded and 22.1V on the ground.

Just as a reference batt temp at start 15.7C after flight 37.6C
The chargers output is  26.3V at 3.83A, quite a bit less than 1C even, the reason why it takes >80mins to charge. (So its not your normal 6S lipo, why it would not be so easy to fully charge with a lipo charger.)

Chris Con Posted at 2015-2-14 11:21
Can anyone just turn their inspire 1 on, open up the pilot app, click the battery icon and tell me w ...

TB47 at 98%, voltage is 25.7

qmawhinney.gmai Posted at 2015-2-14 22:38
25.9V  4244 mAh from the TB47 100%
13 min 38 flight just hovering in GPS set down at 21.4V loaded an ...

qmawhinney- You are experiencing exactly what I am then.. around 26V fully charged down to 22V when the battery gets below 39 percent. Good to know this is the "normal" thing.