Folks ... does anyone know if I can use my iPhone 7 Plus with the new mophie juice pack air?  If not, will the Mavic work with a naked iPhone 7 Plus?

Iphone 7 Plus is now a supported device but dont know about the Morphie

The Rev Posted at 2017-1-8 07:20
Iphone 7 Plus is now a supported device but dont know about the Morphie

Okay so supported also means that it will fit inside the holder.  Thank you very much for your assistance!

Just because 7 Plus is supported does not mean it will fit with Mophie attached. How much thicker does it make the phone? It may prevent it from fitting in jaws.

fans593fc987 Posted at 2017-1-8 07:37
Okay so supported also means that it will fit inside the holder.  Thank you very much for your assistance!

Yes the 7 Plus fits without the Mophie but unsure with it on

I have a Spigen Slim armour, which makes my iPhone 7 plus about it about 10.5mm.  Without the case, the iPhone 7 plus is 7.3mm.

I have found that without a case, its a tight squeeze to get it in.  Also, if you fully put it in the jaws, it covers the light sensor for the screen, but more importantly it covers your home button so you can't control your phone very easily.

I have actually just come back from flying, and this time i left my case on.  It WONT fit in the jaws, but I found my phone is securely in place as shown in the attached photos.  In the photos, yes it does look like the phone is about to fall out... but give it a try, its truly secure and solid in without actually the need to clamp the phone screen etc.

Note:  Dont leave the cable in the little slider on the side, take it out and plug into the phone and dont put it back in the slider

Hope that helps and let me know if you have any problems.

Ugh .... really would have liked a better fit ... okay thanks for the pics ... this is very helpful!

I decided to go with this so that I could attach my iPAD Mini to the Mavic Controller Link

fans593fc987 Posted at 2017-1-8 09:26
I decided to go with this so that I could attach my iPAD Mini to the Mavic Controller Link

Fair enough.  Looks solid but pretty bulky. Just be aware that it looks like it will cover the controller screen. Not really an issue as you have everything on the tablet screen.  Hopefully it will remain pretty balanced in terms of weight distribution.

Granted it would be nice to have a better bit, but as i said... I couldnt even pull the phone out from that without moving the arms out, even though it looks like it is barely being held.

fans593fc987 Posted at 2017-1-8 09:26
I decided to go with this so that I could attach my iPAD Mini to the Mavic Controller Link

IPad mini fits without that bracket

https://techwewant.com/how-to-se ... d1a9ff7a#.burif1ucu

The Rev Posted at 2017-1-8 09:57
IPad mini fits without that bracket

https://techwewant.com/how-to-setup-ipad-mini-with-dji-mavic-pro-2cd1a9ff7a#.burif1ucu

Thank you for the link ... I just ordered the right angled cable and going to try.