Please select Into the mobile phone version | Continue to access the computer ver.
ESC compatibility
287 2 2017-2-12 01:02:38
Hazardpro1
lvl.3
United Kingdom
Offline

Can any of the DJI gang confirm if the T-motor Air 40A ESCs are compatable with the N3, LB2?

Reading the N3 spec it works with ESCs with "pulse width 1520 center position,1000us-2000us,400hz output"


The Air 40A ESCs are 600hz (thats all ive been able to find out at present) "supports a signal frequency of up to 621hz"


OR is another here successfully funning these ESCs on the same spec rig?


H
2017-2-12 01:02:38
Use props
Hazardpro1
lvl.3
United Kingdom
Offline

I had a reply back from T-motor who said;

"AIR40A is around 1100μs-1940μs. You should calibrate the ESC before you use them."

Which I have done via LB2.
2017-2-13 14:30:48
Use props
fans9574c01b
lvl.1
Flight distance : 1598928
Puerto Rico
Offline

Hazardpro1 Posted at 2017-2-13 14:30
I had a reply back from T-motor who said;

"AIR40A is around 1100μs-1940μs. You should calibrate the ESC before you use them."

How have they been working? Which motors do you use with the AIR40A?
2017-8-11 11:40:33
Use props
You need to log in before you can reply Login | Register now

Credit Rules

Close

DJI RecommendsPrevious /1 Next