Please select Into the mobile phone version | Continue to access the computer ver.
Ronin-mx is not a center line
368 3 2017-3-7 16:07:36
Zlosnik
lvl.2
Poland
Offline

Hi. This is my problem. Look at this. Ronin-mx after powered on is always about 10 degrees on right in PAN axis and abou 2 degrees on left in ROLL axis.
After connect to Matrice600 - after calibrate its powered off and not powered on.



2017-3-7 16:07:36
Use props
IsraelPaya
lvl.1
Flight distance : 2456
Spain
Offline

It happens the same to me, though on the other side, I mean, about 10 degrees on the left. Did you find the solution?
2017-6-2 14:25:07
Use props
Zlosnik
lvl.2
Poland
Offline

Yes. Dealer DJI replace product for a new.
2017-9-12 00:36:06
Use props
DJI-Mark
Moderator
Canada
Offline

Please contact support to see about servicing. Before doing that, just make sure you try the proper balancing and calibration process on the Assistant Software. Let us know if you have any further questions.
2017-9-18 07:07:21
Use props
You need to log in before you can reply Login | Register now

Credit Rules

Close

DJI RecommendsPrevious /1 Next