Mavic pro controller problems
2256 14 2017-3-9
Uploading and Loding Picture ...(0/1)
o(^-^)o
dOVn8STcgtRQ
lvl.1

United Kingdom
Offline

Can anyone from Dji help me. I tried to do a controller calibration and as seen in the video the right stick upon pressing start is of center to the right. Ive noticed that the mavic will drift slightly to the right after movement then settle in place. Any help would be appreciated. Thanks
2017-3-9
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
Offline

Could you please clarify your current firmware version? Is the firmware up to date?
If convenient, please make a short video of the calibration. I'll help to check it.
2017-3-9
Use props
dOVn8STcgtRQ
lvl.1

United Kingdom
Offline

Hi mindy, thanks for the quick reply I am using v4.0.5 (2836) heres a link to the video... as seen its fine until I click start then it shifts off center. https://youtu.be/_vycFI39wLQ
2017-3-9
Use props
dOVn8STcgtRQ
lvl.1

United Kingdom
Offline

This is a image of all my firmware
1489050044837-235900507.jpg
2017-3-9
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
Offline

dOVn8STcgtRQ Posted at 2017-3-9 01:00
This is a image of all my firmware

The image is not clear enough.
Could you please help me to confirm the aircraft firmware version is 1.03.300 or 1.03.500?
Have you tried to rotate the control stick in every direction instead of rotate it to just left?
Please click the "reply" button then I can see you are responding to me.
2017-3-9
Use props
dOVn8STcgtRQ
lvl.1

United Kingdom
Offline

Hi, I cant see a reply botton on my phone sorry. The aircraft is 1.03.300 thr calibration was done in full and completed. However everytime I go back and click start the right stick shifts to the right as seen in the video. Do you know how I can reply directly? Thankyou
2017-3-9
Use props
dOVn8STcgtRQ
lvl.1

United Kingdom
Offline

DJI Mindy Posted at 2017-3-9 03:14
The image is not clear enough.
Could you please help me to confirm the aircraft firmware version is 1.03.300 or 1.03.500?
Have you tried to rotate the control stick in every direction instead of rotate it to just left?

Is this how to reply directly?
2017-3-9
Use props
dOVn8STcgtRQ
lvl.1

United Kingdom
Offline

DJI Mindy Posted at 2017-3-9 03:14
The image is not clear enough.
Could you please help me to confirm the aircraft firmware version is 1.03.300 or 1.03.500?
Have you tried to rotate the control stick in every direction instead of rotate it to just left?

Apologies the aircraft is on the latest firmware. I Did a full calibration on the controller and it did not rectify the problem. Ive attached a new photo for you. Is their anything I can try? Thanks
20170309_124251.jpg
2017-3-9
Use props
dOVn8STcgtRQ
lvl.1

United Kingdom
Offline

Aircraft 1.03.0500
Remote 1.03.0500
Flight database 00.00.01.04
App database 00.00.01 04
2017-3-9
Use props
dOVn8STcgtRQ
lvl.1

United Kingdom
Offline

As I said earlier I have run the full calibration until it succesfully completes numerous times and as shown in the following video the right stick will jump 5-8% to the right upon pressing start. Thanks
2017-3-9
Use props
dOVn8STcgtRQ
lvl.1

United Kingdom
Offline

https://youtu.be/KKTbjsVwH5c
2017-3-9
Use props
dOVn8STcgtRQ
lvl.1

United Kingdom
Offline

The above video was taken again after a successfull calibration. As you can see the center point of my right stick is not correct. Any suggestions mindy?
2017-3-9
Use props
dOVn8STcgtRQ
lvl.1

United Kingdom
Offline

Dji ken can you help?
2017-3-9
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
Offline

dOVn8STcgtRQ Posted at 2017-3-9 04:51
As I said earlier I have run the full calibration until it succesfully completes numerous times and as shown in the following video the right stick will jump 5-8% to the right upon pressing start. Thanks

It's probably a hardware issue. I'd suggest you to send it in for further diagnosis.
You could get in touch with our tech support at support.eu@dji.com.
2017-3-10
Use props
Pip
New
Flight distance : 1240620 ft
  • >>>
Burkina Faso
Offline

DJI Mindy Posted at 2017-3-10 03:52
It's probably a hardware issue. I'd suggest you to send it in for further diagnosis.
You could get in touch with our tech support at .

Hello Mindy,
I am travelling in W Africa for another month and have EXACTLY the same problem. I have reinstalled the firmware, the app and tried everything the DJI chat suggested. The transmitter is not damaged or mistreated (has its own special box) and looks completely normal but does what this guy says. Any solutions? Someone has suggested using magnets to realign the joystick. Have to find a magnet first!
2017-7-12
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules