Please select Into the mobile phone version | Continue to access the computer ver.
Unable upgrade controller firmware from 1.1.5
Uploading and Loding Picture ...(0/1)
o(^-^)o
sc1207
lvl.1

Hong Kong
Offline

Hi all,

I've left my Phantom 3 Pro idle for sometime and just started to get it out again. The first thing I did was to update firmware which went fine for the drone but I've been quite stuck with the controller.

The Dji GO app shows my current controller firmware version to be 1.1.5 and according to instructions I downloaded the firmware and put in on a usb drive then inserted that in the controller and turned it on but nothing happens. Does anyone have any ideas for fixing this??
2017-3-14
Use props
iMeMoz
lvl.1
Flight distance : 298720 ft
Finland
Offline

How long did you wait? It might take even 60second before update begins.
Where did you downloaded firmware? Did you format your usb stick, before putting firmware into it?
2017-3-14
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
Offline

Could you please clarify which version of the firmware you have downloaded?
You need to update the firmware to 1.3.20 first, then you can update the firmware to latest version.
2017-3-15
Use props
fans3e81435e
lvl.3

United States
Offline

Downloaded latest firmware on bird then tried to download it on the remote with sd card but no luck finally used dji go app and successfully updated.
2017-3-15
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules