Please select Into the mobile phone version | Continue to access the computer ver.
Last FW update / Controller don't work anymore/ RESOLVED BY DJI SUPPORT
962 0 2015-3-2
Uploading and Loding Picture ...(0/1)
o(^-^)o
patou72
Second Officer
Flight distance : 3316614 ft
Switzerland
Offline

Hello guys,

I just did my Firmware update on the Inspire....result "Succes". Then i tried to update the controller and the message is:

==========1970.01.01 00:00:12==========
Packet: /mnt/usb/WM610_FW_V01.02.00.17.bin,
Result: Error
Failed to obatin firmware version. Power cycle the remote controller to upgrade the firmware again.


So now nothing works anymore, no Beeping sound when i power on the controller, no red or green light (The indicator is just white), no control about the aircraft, no response within the DJI Pilot App. I tried to power cycle a few times the controller and to reinstall the new firmware but nothing happened.

Any ideas please how to reboot the controller or to reinstall the new Firmware?

Thanks for some hints (also from Dji)
2015-3-2
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules