After the latest update  I got a notification on the screen requiring me to calibrate the VPS.  I have the latest Assistant 2 app but every time I try to calibrate the VPS it takes me through the tutorials but has greyed out the "start Calibration" step - it constantly says I must reboot the P4P... to no avail!  What am I doing wrong??

Can DJI help me out here please??

Hi,

See this thread, others have found that reducing the resolution on your monitor also may help.
I my case, the laptop that worked was 1920x1080, and the one that did not work was 1920x1200.

http://forum.dji.com/thread-82646-1-1.html

Try rparge's advice and let us know if the issue persists. In addiditon, do you have a single monitor or dual monitor set up?

DJI-Jamie Posted at 2017-4-17 12:33
Try rparge's advice and let us know if the issue persists. In addiditon, do you have a single monitor or dual monitor set up?

I had a similar issue. I have a dual monitor, but the message appeared on both. Monitor 1: 1920x1080; Monitor #2: 2560x1080 (ultra-wide).
I resolved it by reverting back to Assistant 2 V1.1.0-0 and turning 'Driver signature enforcement' off when installing (you need to restart PC with <shift>Restart to get the option).

rparge Posted at 2017-4-17 11:30
Hi,

See this thread, others have found that reducing the resolution on your monitor also may help.

Ah!  Thanks - will try!

DJI-Jamie Posted at 2017-4-17 12:33
Try rparge's advice and let us know if the issue persists. In addiditon, do you have a single monitor or dual monitor set up?

Single 1080p monitor....  Will try later today again.  Thanks!

Punchbuggy Posted at 2017-4-17 13:28
I had a similar issue. I have a dual monitor, but the message appeared on both. Monitor 1: 1920x1080; Monitor #2: 2560x1080 (ultra-wide).
I resolved it but reverting back to Assistant 2 V1.1.0-0 and turning 'Driver signature enforcement' off when installing.

Thank you!

I 2 Fly Posted at 2017-4-17 23:57
Single 1080p monitor....  Will try later today again.  Thanks!

Please keep us posted when you can.

Nothing worked / helped...  I had to borrow anther PC, install Assistant 2 and only then had success.  Thanks everyone - you put me on the right track!